Experimental study on local bond-slip constitutive model between steel and steel fiber reinforced concrete structure of circular cross-section
Authors:
- 20 November 2022
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (5) , 824-841
Abstract
The interface slip between shape steel and concrete is one of the biggest problems in numerical simulation of composite structures, this paper aims to investigate interfacial bond-slip behavior between steel and steel fiber reinforced concrete. For this purpose, a series of push-out tests on 15 circular section specimens which were designed and fabricated with different steel fiber ratio, interface embedded length and concrete cover thickness have been done. Experimental results show that average bond strength versus free end slip curves of each specimen is similar, and then a basic average bond strength-free end slip constitutive model was proposed in this paper. Meanwhile, considering the distribution regularities of steel strains, local bond strength and relative slip along the interface embedded length at different load levels were obtained through the mechanical derivation, the results show that the maximum local bond strength was located near the free end, and the local bond strength away from free end tended to be steady. Based on the basic average bond strength-free end slip constitutive model, two position functions were proposed to describe the local bond-slip constitutive model considering the variation of positions. Two position functions are of great significance for further research on SSFRC non-linear properties by FEM.Keywords
Funding Information
- National Natural Science Foundation of China (51208175)
- Fundamental Research Funds for the Central Universities (B200202067)
This publication has 39 references indexed in Scilit:
- Experimental and analytical investigation on RC columns with distributed-steel barSTRUCTURAL ENGINEERING AND MECHANICS, 2013
- Residual bond strength in steel reinforced concrete columns after fire exposureFire Safety Journal, 2012
- Durability of steel reinforced concrete in chloride environments: An overviewConstruction and Building Materials, 2012
- The composite effect of steel fibres and stirrups on the shear behaviour of beams using self-consolidating concreteEngineering Structures, 2011
- Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial CompressionJournal of Structural Engineering, 2010
- Effect of confinement using steel, FRC, or FRP on the bond stress-slip response of steel bars under cyclic loadingMaterials and Structures, 2006
- Behaviour of plain and steel-fibre-reinforced high-strength concrete under uniaxial and biaxial compressionMagazine of Concrete Research, 2005
- Seismic performance of steel-encased composite members with strengthening cross-inclined barsJournal of Constructional Steel Research, 2004
- Anchorage Strength Models for FRP and Steel Plates Bonded to ConcreteJournal of Structural Engineering, 2001
- Shear Connector Requirements for Embedded Steel SectionsJournal of Structural Engineering, 1999