Thermal Management Integrated With Flat Heat Pipes for In-Slot Stator Windings of Electric Motors
- 5 September 2022
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (1) , 699-711
Abstract
Increasing electromagnetic loads can improve the torque density and power density of electric motors; however, these enhancements are limited by the resultant thermal problems. This paper proposes a cooling concept, where flat heat pipes are inserted into the center of the stator slots to directly remove copper loss without consuming power. Detailed thermal models of the flat heat pipes and an electric motor are established using a lumped-parameter thermal network. The thickness of the vapor chamber is found to be the most critical parameter that simultaneously affects the thermal and electromagnetic performance. A case study is carried out on an existing 6-kW drive motor for a ducted fan, and the simulation results are validated through motorette experiments. Research results have shown that a 70°C hot-spot temperature reduction can be achieved, and more than 80% of the copper loss can be removed by the flat heat pipes. Moreover, the shaft power that the thermally modified motor can provide is expected to be 2.4 times that of the reference motor, and a continuous power density of 4.8 kW/kg can be achieved using air as a cooling agent.Keywords
Funding Information
- National Natural Science Foundation of China (U1864212)
This publication has 39 references indexed in Scilit:
- More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport AircraftIEEE Transactions on Transportation Electrification, 2015
- Indirect slot cooling for high-power-density machines with concentrated winding2015
- Experimental study of oil cooling systems for electric motorsApplied Thermal Engineering, 2015
- Experimentation of an Electric Machine Technology Demonstrator Incorporating Direct Winding Heat ExchangersIEEE Transactions on Industrial Electronics, 2014
- Heat transfer and fluid flow theory2014
- Mathematical modeling of steady-state operation of a loop heat pipeApplied Thermal Engineering, 2009
- Heat Pipe Components and Materials2007
- Lumped parameter thermal model for electrical machines of TEFC designIEE Proceedings B Electric Power Applications, 1991
- Heat transfer through a three-phase porous mediumJournal of Physics D: Applied Physics, 1968
- A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase MaterialsJournal of Applied Physics, 1962