Development of a new shear strength criterion for rock joints based on three-dimensional directional roughness parameters
Authors:
- Shulin RenSRShulin Ren
- Qian YinQYQian Yin
- Xi ChenXCXi Chen
- Senlin LuoSLSenlin Luo
- Zhigang TaoZTZhigang Tao
- 1 September 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Abstract
The major aim of the current research is to accurately predict the shear strength of rough joints to properly evaluate the stability of mining structures built on jointed foundations. The roughness of the joint surface is direction-dependent and is a significant factor influencing the peak shear strength of rough joints. Quantitatively evaluating the three-dimensional (3D) roughness of rock joints is a challenge. This study employed a non-contact 3D laser scanning technology to measure the rough joint morphology and adopted the high-precision 3D printing technique to manufacture the photosensitive resin molds. A batch of joints with the same morphology was replicated, and the joint shear tests were performed under five kinds of load conditions. Two new 3D directional roughness metrics were developed to characterize the morphology of rock joints, i.e., the 3D maximum contact area ratio (Am) and the root mean square of the apparent dip that faces the shear direction (θ*2). These two directional roughness parameters have clear physical significance and can capture the anisotropy of surface roughness. A new peak shear strength criterion incorporating the proposed 3D directional roughness parameters was developed. In addition, comparisons were made between the new criterion and the existing criteria in the literature. It was found that the joint roughness coefficient–joint compressive strength model underestimates the shear strength of rock joints. Compared with the 3D models in the literature, the new model has a better agreement with test results. In addition, the anisotropy of shear strength was also investigated. The anisotropy of joint shear strength decreases with increasing applied normal stress.Keywords
Funding Information
- Postdoctoral Research Foundation of China (GZB20240556)
- National Natural Science Foundation of China (42377154)
This publication has 33 references indexed in Scilit:
- A New Stochastic Approach to Predict Peak and Residual Shear Strength of Natural Rock DiscontinuitiesRock Mechanics and Rock Engineering, 2017
- A Fractal Model for the Shear Behaviour of Large-Scale Opened Rock JointsRock Mechanics and Rock Engineering, 2016
- Choosing Appropriate Parameters for Developing Empirical Shear Strength Criterion of Rock Joint: Review and New InsightsRock Mechanics and Rock Engineering, 2016
- Laboratory Investigation on Shear Behavior of Rock Joints and a New Peak Shear Strength CriterionRock Mechanics and Rock Engineering, 2016
- New Peak Shear Strength Criterion of Rock Joints Based on Quantified Surface DescriptionRock Mechanics and Rock Engineering, 2013
- Quantitative Measurements of Fracture Aperture and Directional Roughness from Rock CoresRock Mechanics and Rock Engineering, 2012
- Importance of Tensile Strength on the Shear Behavior of DiscontinuitiesRock Mechanics and Rock Engineering, 2011
- The Shear Behavior of Bedding Planes of Weakness Between Two Different Rock Types with High Strength DifferenceRock Mechanics and Rock Engineering, 2009
- Manuel Rocha Medal Recipient Shear Strength of Rock Joints Based on Quantified Surface DescriptionRock Mechanics and Rock Engineering, 2006
- The shear strength of rock joints in theory and practiceRock Mechanics and Rock Engineering, 1977