Behind the Manufacturing of Industrial Clay Bricks: Drying Stage Predictions Using CFD
Open Access
- 1 March 2022
- journal article
- research article
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-15
Abstract
Drying of ceramic materials plays important role for industry, involving questions related to investments, energy consumption, product quality, and environmental pollution. In this sense, this work aims to predict heat and mass transfer during the drying process of an industrial clay brick in oven. Simulations were carried out by computational fluid dynamics (Ansys CFX software). Results of the drying and heating kinetics and the moisture content and temperature distributions of the product at different elapsed times are shown and analyzed. The results showed a good agreement between the experimental data, of the surface temperature and the average moisture content, and the numerical results. From the results, it was verified that the proposed mathematical modeling was adequate, providing predicted results in accordance with the experimental data used. Furthermore, numerical results showed that an increase in drying-air temperature and a decrease in relative humidity lead to an increase in heating and moisture removal rates. In the research, it was observed that mass diffusion coefficient increased with increasing drying-air temperature.Keywords
Funding Information
- CAPES (UIDB/04708/2020, UIDP/04708/2020)
This publication has 15 references indexed in Scilit:
- Grid refinement study for three dimensional CFD model involving incompressible free surface flow and rotating objectComputers & Fluids, 2017
- Modeling of coupled heat and mass transfer during drying of tropical woodsInternational Journal of Thermal Sciences, 2016
- Energetic and Exergetic Analysis of the Clay Bricks Drying in an Industrial Tunnel DryerDefect and Diffusion Forum, 2016
- Experimental Drying of Ceramics Bricks Including ShrinkageDefect and Diffusion Forum, 2015
- Modeling and Numerical Simulation of Clays Cracking During DryingDrying Technology, 2015
- Drying of clay slabs: Experimental determination and prediction by two-dimensional diffusion modelsCeramics International, 2013
- Heat and mass transport in an industrial tunnel dryer: Modeling and simulation applied to hollow bricksApplied Thermal Engineering, 2013
- Numerical Experiments on Application of Richardson Extrapolation With Nonuniform GridsJournal of Fluids Engineering, 1997
- A Numerical Study of Transient Deformation and Stress Behavior of a Clay Slab During DryingDrying Technology, 1997
- Perspective: A Method for Uniform Reporting of Grid Refinement StudiesJournal of Fluids Engineering, 1994