Procedure for refinement of the height component in Real-Time Kinematic GNSS
- 1 May 2026
- journal article
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 20 (4) , 793-801
Abstract
The Real-Time Kinematic (RTK) method of Global Navigation Satellite Systems (GNSS) technology allows the position of points to be determined with centimeter accuracy. The vertical component of the position is determined less accurately than the horizontal component. Two cases were analyzed to ensure higher accuracy of the vertical component on a set of test measurements obtained using 11 GNSS receivers under different observation conditions, at different times of day, with different vector lengths, and different averaging lengths. In the first case, it was found that if the maximum elevation angle – the elevation angle of the satellite closest to the zenith – is greater than 70°, better accuracy of the vertical component is achieved for most of the tested GNSS receivers. In the second case, it was found that averaging measurements at three specified times of day – 6 a.m., 3 p.m., and 9 p.m. – ensures greater accuracy of the vertical component, whose unit mean error is 21 % lower than the unit mean error of a single height measurement. The accuracy of the final average of three measurements is 54 % higher than the accuracy of a single measurement.Keywords
This publication has 11 references indexed in Scilit:
- Monitoring of networked RTK reference stations for coordinate reference system realization and maintenance – case study of the Czech RepublicJournal of Applied Geodesy, 2024
- Accuracy Evaluation of Real-time Kinematic Positioning Service Based on Digital Multimedia Broadcast Network for Highway Construction Site in KoreaSensors and Materials, 2023
- Accuracy of GNSS RTK/NRTK height difference measurementApplied Geomatics, 2022
- The usability of GNSS mass-market receivers for cadastral surveys considering RTK and NRTK techniquesGeodesy and Geodynamics, 2019
- Evaluating ortho-photo production potentials based on UAV real-time geo-referencing pointsSpatial Information Research, 2018
- A Comparison of the Accuracy of VRS and Static GPS Measurement Results for Production of Topographic Map and Spatial Data: A Case Study on CORS-TRTehnicki vjesnik - Technical Gazette, 2018
- Impact of tropospheric modelling on GNSS vertical precision: an empirical analysis based on a local active networkInternational Journal of Digital Earth, 2017
- Robust Analysis of Network-Based Real-Time Kinematic for GNSS-Derived HeightsSensors, 2015
- Assessment of Commercial Network RTK User Positioning Performance over Long Inter-Station DistancesJournal of Global Positioning Systems, 2010
- Erratum to “J. Kostelecký et al. (2004), Quasigeids for the Territory of the Czech Republic, Stud. Geophys. Geod., 48, 503-518”Studia Geophysica et Geodaetica, 2004