Jakub Kostelecky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jakub Kostelecky has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Ondrej Vana
Czech Technical University in Prague
4 shared publications - Alessandro Germak
INRiM, National Institute of Metrological Research, 10135 Torino, Italy
2 shared publications - Christian Rothleitner
Physikalisch-Technische Bundesanstalt (PTB), 38116 Braunschweig, Germany
2 shared publications - Hana Staňková
Department of Geodesy and Mine Surveying, Faculty of Mining and Geology, VSB – Technical University of Ostrava
2 shared publications - Sébastien Merlet
Observatoire de Paris
2 shared publications - Vojtech Pálinkáš
Vyzkumny ustav geodeticky topograficky a kartograficky, Zdiby, 250 66, CZECH REPUBLIC
2 shared publications
Latest Publications
- 5 October 2026
- Published by Springer Nature in Applied Geomatics
- Vol. 18 (4) , 161
Correction: Procedure for transforming ETRS/ITRS into a locally deformed national reference system
- 5 October 2026
- Published by Springer Nature in Applied Geomatics
- Vol. 18 (4) , 161
Correction: Procedure for transforming ETRS/ITRS into a locally deformed national reference system
- 16 September 2026
- Published by Springer Nature in Applied Geomatics
- Vol. 18 (4) , 145
Procedure for transforming ETRS/ITRS into a locally deformed national reference system
- 16 September 2026
- Published by Springer Nature in Applied Geomatics
- Vol. 18 (4) , 145
Procedure for transforming ETRS/ITRS into a locally deformed national reference system
- 14 June 2026
- Published by Taylor & Francis in Survey Review
- p. 1-9
Optimal procedure for surveying building corners using an RTK GNSS receiver with IMU
1. The RTK (Real-Time Kinematic) method – first proposed by Colombo et al. (1995) – is a relative positioning method within GNSS (Global Navigation Satellite Systems) technology, which enables GNSS...
- 14 June 2026
- Published by Taylor & Francis in Survey Review
- p. 1-9
Optimal procedure for surveying building corners using an RTK GNSS receiver with IMU
1. The RTK (Real-Time Kinematic) method – first proposed by Colombo et al. (1995) – is a relative positioning method within GNSS (Global Navigation Satellite Systems) technology, which enables GNSS...
- 1 May 2026
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 20 (4) , 793-801
Procedure for refinement of the height component in Real-Time Kinematic GNSS
The Real-Time Kinematic (RTK) method of Global Navigation Satellite Systems (GNSS) technology allows the position of points to be determined with centimeter accuracy. The vertical component of the position is determined less accurately than the horizontal component. Two cases were analyzed to ensure higher accuracy of the vertical component on a set of test measurements obtained using 11 GNSS receivers under different observation conditions, at different times of day, with different vector lengths, and different averaging lengths. In the first case, it was found that if the maximum elevation angle – the elevation angle of the satellite closest to the zenith – is greater than 70°, better accuracy of the vertical component is achieved for most of the tested GNSS receivers. In the second case, it was found that averaging measurements at three specified times of day – 6 a.m., 3 p.m., and 9 p.m. – ensures greater accuracy of the vertical component, whose unit mean error is 21 % lower than the unit mean error of a single height measurement. The accuracy of the final average of three measurements is 54 % higher than the accuracy of a single measurement.
- 1 May 2026
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 20 (4) , 793-801
Procedure for refinement of the height component in Real-Time Kinematic GNSS
The Real-Time Kinematic (RTK) method of Global Navigation Satellite Systems (GNSS) technology allows the position of points to be determined with centimeter accuracy. The vertical component of the position is determined less accurately than the horizontal component. Two cases were analyzed to ensure higher accuracy of the vertical component on a set of test measurements obtained using 11 GNSS receivers under different observation conditions, at different times of day, with different vector lengths, and different averaging lengths. In the first case, it was found that if the maximum elevation angle – the elevation angle of the satellite closest to the zenith – is greater than 70°, better accuracy of the vertical component is achieved for most of the tested GNSS receivers. In the second case, it was found that averaging measurements at three specified times of day – 6 a.m., 3 p.m., and 9 p.m. – ensures greater accuracy of the vertical component, whose unit mean error is 21 % lower than the unit mean error of a single height measurement. The accuracy of the final average of three measurements is 54 % higher than the accuracy of a single measurement.
- Open Access
- 19 March 2026
- Published by Springer Nature in GPS Solutions
- Vol. 30 (2) , 98
Accuracy assessment of measurements by laser RTK compared to precise total station and GNSS reference
- 19 March 2026
- Published by Springer Nature in GPS Solutions
- Vol. 30 (2) , 98
Open AccessAccuracy assessment of measurements by laser RTK compared to precise total station and GNSS reference
- Open Access
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Comparison of GNSS, Laser Scanning, and Total Station Measurement Accuracy with Criteria of Digital Technical Map in Czechia
Criteria of the Digital technical mapping (DTM) in Czechia requires horizontal accuracy of 14 cm and elevation accuracy of 12 cm. This study compares GNSS, total station, and mobile laser scanning measurement techniques to evaluate their precision against these legal standards. GNSS is a fast and effective positioning tool but can be affected by satellite position, signal interference, and environmental factors. To test its accuracy, GNSS measurements were compared to total station data, which was aligned with the national geodetic control network. Independent verification was carried out using mobile laser scanning, which also produced sample outputs for DTM evaluation. Results show that GNSS achieves reasonable accuracy in favorable conditions but remains sensitive to external influences. The total station provides the highest precision due to stable reference points and controlled measurement techniques. Mobile laser scanning offers rich spatial data but requires extensive processing and may have accuracy challenges in complex terrain. The generated point cloud serves as a reference dataset for terrain modeling in digital technical mapping. Each method has strengths and limitations. GNSS is useful for rapid data collection, total stations ensure high accuracy, and laser scanning supports detailed spatial documentation. This study helps refine measurement strategies for digital technical mapping while meeting Czech legal accuracy requirements.
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Open AccessComparison of GNSS, Laser Scanning, and Total Station Measurement Accuracy with Criteria of Digital Technical Map in Czechia
Criteria of the Digital technical mapping (DTM) in Czechia requires horizontal accuracy of 14 cm and elevation accuracy of 12 cm. This study compares GNSS, total station, and mobile laser scanning measurement techniques to evaluate their precision against these legal standards. GNSS is a fast and effective positioning tool but can be affected by satellite position, signal interference, and environmental factors. To test its accuracy, GNSS measurements were compared to total station data, which was aligned with the national geodetic control network. Independent verification was carried out using mobile laser scanning, which also produced sample outputs for DTM evaluation. Results show that GNSS achieves reasonable accuracy in favorable conditions but remains sensitive to external influences. The total station provides the highest precision due to stable reference points and controlled measurement techniques. Mobile laser scanning offers rich spatial data but requires extensive processing and may have accuracy challenges in complex terrain. The generated point cloud serves as a reference dataset for terrain modeling in digital technical mapping. Each method has strengths and limitations. GNSS is useful for rapid data collection, total stations ensure high accuracy, and laser scanning supports detailed spatial documentation. This study helps refine measurement strategies for digital technical mapping while meeting Czech legal accuracy requirements.
- Open Access
- 19 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 3369
Determination of Length Correction from the Projection and Deformation of Geodetic Controls in the Realization of Precision Linear Structures—A Case Study of the Coordinate System S-JTSK, Czech Republic
Long linear constructions, particularly high-speed railway lines, place very high demands on the accuracy of the fundamental geodetic controls on which they are based. In general, national reference coordinate systems possess deformations (relative inconsistencies) due to historical factors—primarily the low accuracy of the measurement methods that were used at the time of their development. The reference coordinate system S-JTSK used in the Czech Republic comprises local deformations that are determined using a modern space geodesy method—the Global Navigation Satellite Systems (GNSS). An analysis of the local deformations revealed that, in the Czech Republic, 99% of the length corrections from the coordinate system deformations are in the interval of −1.4 to +1.4 cm/km with a standard deviation of up to 1.4 cm/km. The extreme value in this regard is the length correction from the deformation of +2.5 cm/km and the standard deviation of 3.6 cm/km. These values exceed the required accuracy of 1 cm/km, and the length corrections from the deformations, together with the length corrections from the used projection, must be taken into account when undertaking surveying work on high-speed railway lines in the Czech Republic (also with the height correction for lengths). The magnitude of the scatter also indicates the distortion of the S-JTSK projection conformality due to the deformations.
- 19 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 3369
Open AccessDetermination of Length Correction from the Projection and Deformation of Geodetic Controls in the Realization of Precision Linear Structures—A Case Study of the Coordinate System S-JTSK, Czech Republic
Long linear constructions, particularly high-speed railway lines, place very high demands on the accuracy of the fundamental geodetic controls on which they are based. In general, national reference coordinate systems possess deformations (relative inconsistencies) due to historical factors—primarily the low accuracy of the measurement methods that were used at the time of their development. The reference coordinate system S-JTSK used in the Czech Republic comprises local deformations that are determined using a modern space geodesy method—the Global Navigation Satellite Systems (GNSS). An analysis of the local deformations revealed that, in the Czech Republic, 99% of the length corrections from the coordinate system deformations are in the interval of −1.4 to +1.4 cm/km with a standard deviation of up to 1.4 cm/km. The extreme value in this regard is the length correction from the deformation of +2.5 cm/km and the standard deviation of 3.6 cm/km. These values exceed the required accuracy of 1 cm/km, and the length corrections from the deformations, together with the length corrections from the used projection, must be taken into account when undertaking surveying work on high-speed railway lines in the Czech Republic (also with the height correction for lengths). The magnitude of the scatter also indicates the distortion of the S-JTSK projection conformality due to the deformations.
- 1 January 2025
- Published by IOP Publishing in Metrologia
- Vol. 62 (1A)
Final Report on key comparison EURAMET.M.G-K2.2023 of absolute gravimeters
Main text: The regional key comparison of absolute gravimeters, EURAMET.M.G-K3.2023, together with a simultaneously organized additional comparison, was held in Germany at the Geodetic Observatory Wettzell of the German Federal Agency for Cartography and Geodesy in between May and June 2024. This report presents the list of participants who performed measurements, the gravity results submitted by the operators and the data processing strategy. The link to CCM.G-K2.2023 was established via three participants who took part in both comparisons. Finally, the results of the least-squares adjustment, which takes into account the correlations between measurements, are presented by means of the comparison reference values (CRV) and deviations of each gravimeter from the CRV. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2025
- Published by IOP Publishing in Metrologia
- Vol. 62 (1A)
Final Report on key comparison EURAMET.M.G-K2.2023 of absolute gravimeters
Main text: The regional key comparison of absolute gravimeters, EURAMET.M.G-K3.2023, together with a simultaneously organized additional comparison, was held in Germany at the Geodetic Observatory Wettzell of the German Federal Agency for Cartography and Geodesy in between May and June 2024. This report presents the list of participants who performed measurements, the gravity results submitted by the operators and the data processing strategy. The link to CCM.G-K2.2023 was established via three participants who took part in both comparisons. Finally, the results of the least-squares adjustment, which takes into account the correlations between measurements, are presented by means of the comparison reference values (CRV) and deviations of each gravimeter from the CRV. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- Open Access
- 29 November 2024
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 1 (2)
Practical Measurement of GNSS Technologies from EMLID and SOKKIA Receivers and their Comparison
The practical measurement and comparison of GNSS technologies from SOKKIA and EMLID receivers is only a demonstration of how GNSS surveying technology with accuracy of a few centimetres can be used effectively in conditions of the Czech Republic. Czech surveyors use GNSS technology primarily as a simple data collection in open terrain - it cannot be used in buildings. Most often they are simple measurements such as terrain surveying for the designer, surveying for the purposes of land registry, laying out constructions and others. There are several methods for determination of position, i.e. location in defined reference coordinate and height systems (in the Czech Republic they are S - JTSK and Bpv), according to receiver’s software using networked RTK method (corrections from providers of network of reference stations - such as TOPNET, CZEPOS, and others) or RTK base – rover method or fast static method. The task is to compare the measurement time intervals from each technology and the accuracy of the measurement on the known points of the Czech national trigonometric network. At the end the financial comparison of both technologies is presented.
- 29 November 2024
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 1 (2)
Open AccessPractical Measurement of GNSS Technologies from EMLID and SOKKIA Receivers and their Comparison
The practical measurement and comparison of GNSS technologies from SOKKIA and EMLID receivers is only a demonstration of how GNSS surveying technology with accuracy of a few centimetres can be used effectively in conditions of the Czech Republic. Czech surveyors use GNSS technology primarily as a simple data collection in open terrain - it cannot be used in buildings. Most often they are simple measurements such as terrain surveying for the designer, surveying for the purposes of land registry, laying out constructions and others. There are several methods for determination of position, i.e. location in defined reference coordinate and height systems (in the Czech Republic they are S - JTSK and Bpv), according to receiver’s software using networked RTK method (corrections from providers of network of reference stations - such as TOPNET, CZEPOS, and others) or RTK base – rover method or fast static method. The task is to compare the measurement time intervals from each technology and the accuracy of the measurement on the known points of the Czech national trigonometric network. At the end the financial comparison of both technologies is presented.
- 16 October 2024
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 19 (2) , 333-345
Monitoring of networked RTK reference stations for coordinate reference system realization and maintenance – case study of the Czech Republic
Networked Real-Time Kinematic (NRTK) is the most widely used GNSS (Global Navigation Satellite Systems) positioning technique in surveying practice due to its speed, operability and sufficient accuracy. Positioning using NRTK methods in the European Terrestrial Reference System ETRS89 obligatory coordinate system is tied to the positioning of reference stations of the RTK network. Monitoring of GNSS reference stations provides both the determination of the position of individual stations in the obligatory coordinate system and the monitoring of daily position deviations of individual stations. The application to four networks of GNSS reference stations in the Czech Republic has demonstrated the accuracy of the positioning of stations from the daily solution at the level of 1.2 mm in the horizontal components and 3.8 mm in the vertical component. This accuracy is quite suitable for NRTK methods that determine position with centimetre accuracy. At the same time, it allows to detect the behaviour of time series of coordinates of individual stations – sudden jumps, linear and periodic trends. The accuracy achieved also allows tracking geokinematic movements.
- 16 October 2024
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 19 (2) , 333-345
Monitoring of networked RTK reference stations for coordinate reference system realization and maintenance – case study of the Czech Republic
Networked Real-Time Kinematic (NRTK) is the most widely used GNSS (Global Navigation Satellite Systems) positioning technique in surveying practice due to its speed, operability and sufficient accuracy. Positioning using NRTK methods in the European Terrestrial Reference System ETRS89 obligatory coordinate system is tied to the positioning of reference stations of the RTK network. Monitoring of GNSS reference stations provides both the determination of the position of individual stations in the obligatory coordinate system and the monitoring of daily position deviations of individual stations. The application to four networks of GNSS reference stations in the Czech Republic has demonstrated the accuracy of the positioning of stations from the daily solution at the level of 1.2 mm in the horizontal components and 3.8 mm in the vertical component. This accuracy is quite suitable for NRTK methods that determine position with centimetre accuracy. At the same time, it allows to detect the behaviour of time series of coordinates of individual stations – sudden jumps, linear and periodic trends. The accuracy achieved also allows tracking geokinematic movements.