Abstract
The design of vertical-cavity surface-emitting laser (VCSEL) drivers poses significant challenges due to the limited bandwidth of VCSELs, their dynamic characteristics that vary with bias currents and data patterns, and their deteriorated performance at elevated temperatures. The complexity of driver design, especially at extreme temperatures, can be reduced by accounting for the laser’s physical properties during the design. In particular, the oxide aperture of the VCSEL offers a valuable degree of freedom in the design of VCSEL drivers. VCSELs with larger apertures exhibit higher output power and increased roll-off current. Moreover, the differential resistance is significantly lower at larger apertures, which, in turn, decreases the driver required voltage swing to deliver the target VCSEL bias and modulation currents. These benefits come with the penalty of slightly worse small-signal bandwidth, which may however, be mitigated by biasing the large-aperture VCSELs at higher currents. This facilitates the design of highly efficient drivers in advanced CMOS technologies where pre-emphasis and forward error correction techniques are inexpensive and effective.
Funding Information
  • Swedish Foundation for Strategic Research (CHI19-0004)

This publication has 14 references indexed in Scilit: