Abstract
Four types of pulse shape analysis (PSA) algorithms were examined with the objective of identifying the light charged particles utilizing a CsI(Tl) detector. These included the fall time comparison method, the charge comparison method, the Reconstructive Particle IDentification (RPID) method, and the Quick Particle IDentification (QPID) method. The beam test with the CsI(Tl) detector demonstrates that the charge comparison method, the RPID method, and the QPID method exhibit satisfactory capacities in identifying the incident particles of hydrogen and helium isotopes. Conversely, the fall time comparison method exhibits suboptimal performance in particle identification. The linearization process was employed to obtain the quantification results in the performance of the three PSA methods. The findings indicate that the QPID method demonstrated the optimal performance, followed by the charge comparison method, and concluding with the RPID method. In consideration of the complexity of the algorithm, the charge comparison method with the optimized windows introduced in QPID is preferable to our scheme. A crystal array and a silicon detector array, which can compose a telescope system, are under construction at the experimental terminals of the HIAF-HIRIBL facility. The present study demonstrates that the CsI(Tl) detector alone can achieve a better result in identifying the incident particles with a charge number Z less than 3. This capability enables the restriction of silicon detectors utilization to the forward polar angle region, with the larger polar angle region covered by CsI(Tl) detectors during some specific experimental studies. CsI(Tl) detectors have been demonstrated to exhibit sufficient performance in identifying light charged particles.

This publication has 51 references indexed in Scilit: