High-temperature ex-vessel corium spreading. Part 2: scaling principles for gravity-viscous spreading with slip at the melt–substrate interface
- 25 October 2021
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 59 (4) , 459-471
Abstract
Promoting the spreading of molten corium represents a key strategy in the dissipation of decay heat and in the maintainence of containment integrity in the aftermath of a severe nuclear accident. Precise repeatability is difficult to achieve during high-temperature melt spreading experiments, and so scaling factors are necessary to correct for differences in flow rate, viscosity, and density between comparative experiments. A gravity-viscous momentum balance derived for spreading in the two-dimensional spreading geometry employed during recent kg-scale VE-U9 experiments on ceramic and sacrificial concrete substrates establishes that no-slip spreading length scales with the square root of the mass flow rate. Scaling for the reduced mass flow rate and enhanced viscosity implied that the melt spread 37% further on the sacrificial concrete than on the inert ceramic substrate. The possibility of a lubricating film of molten concrete and ablation gases reducing friction at the lower boundary is investigated through the imposition of a slip velocity proportional to the shear at the melt–substrate interface. Simulations over a range of Navier slip lengths implied that spreading length scales with the ratio of slip length to the melt thickness and that spreading length can be augmented by as much as 68% in the case of a virtually frictionless interface.
Keywords
This publication has 31 references indexed in Scilit:
- Magma crystallization and viscosity: A study of molten basalts from the Piton de la Fournaise volcano (La Réunion island)Chemical Geology, 2008
- Gravity currents: a personal perspectiveJournal of Fluid Mechanics, 2006
- The VULCANO VE-U7 Corium spreading benchmarkProgress in Nuclear Energy, 2006
- Slip behavior in liquid films on surfaces of patterned wettability: Comparison between continuum and molecular dynamics simulationsPhysical Review E, 2005
- Corium spreading and coolabilityNuclear Engineering and Design, 2001
- Slow flow of a Bingham fluid in a shallow channel of finite widthJournal of Fluid Mechanics, 2001
- Core melt spreading on a reactor containment floorProgress in Nuclear Energy, 2000
- The spreading of variable-viscosity axisymmetric radial gravity currents: applications to the emplacement of Venusian ‘pancake’ domesJournal of Fluid Mechanics, 1995
- The propagation of two-dimensional and axisymmetric viscous gravity currents at a fluid interfaceJournal of Fluid Mechanics, 1989
- The propagation of two-dimensional and axisymmetric viscous gravity currents over a rigid horizontal surfaceJournal of Fluid Mechanics, 1982