Heat and Mass Transfer in Structural Ceramic Blocks: An Analytical and Phenomenological Approach
Authors:
- Stephane K. B. M. SilvaStephane K. B. M. Silva
- Carlos J. AraújoCACarlos J. Araújo
- João M. P. Q. DelgadoJoão M. P. Q. Delgado
- Ricardo S. GomezRGRicardo S. Gomez
- Hortência L. F. MagalhãesHMHortência L. F. Magalhães
- Maria J. FigueredoMFMaria J. Figueredo
- Juliana A. FigueirôaJFJuliana A. Figueirôa
- Mirenia K. T. BritoMBMirenia K. T. Brito
- José N. O. NetoJNJosé N. O. Neto
- Adriana B. C. PereiraAPAdriana B. C. Pereira
- Leonardo P. L. SilvaLSLeonardo P. L. Silva
- Antonio G. B. LimaAntonio G. B. Lima
Open Access
- 28 September 2022
- Vol. 15 (19) , 7150
Abstract
The ceramic industry is one of the pillars of the Brazilian economy, characterized by making low-cost products and an obsolete manufacturing process from a technological point of view. Among the various stages of production of ceramic materials, drying is one of the most energy-consuming and, in general, causes structural damage to the product, compromising its mechanical performance and final quality. Despite the relevance, studies on the drying of ceramic materials are mostly conducted at the experimental level and limited to some specific operational conditions. In this scenario, this research aims to theoretically study the heat and mass transfers in industrial ceramic blocks during drying. Based on the lumped analysis method, and considering the dimensional variations of the material, new phenomenological mathematical models and their respective analytical solutions are proposed to describe the kinetics of mass loss and heating of the material. The predicted results referring to the thermal and gravimetric behavior of the block during the oven drying process under different conditions are compared with the experimental data, obtaining excellent agreement between the results. Furthermore, the transport coefficients were estimated, proving the dependence of these parameters on the drying air conditions. The convective mass transfer coefficient ranged from 6.69 × 10–7 to 15.97 × 10–7 m/s on the outer surface of the block and from 0.70 × 10–7 to 1.03 × 10–7 m/s on the inner surface of the material when the drying air temperature ranged from 50 to 100 °C. The convective heat transfer coefficient ranged from 4.79 to 2.04 W/(m2.°C) on the outer surface of the block and from 1.00 to 0.94 W/(m2.°C) on the inner surface of the material when air temperature ranged from 50 to 100 °C.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- FAPESQ-PB (Brazilian research agencies)
- Base Funding (UIDB/04708/2020)
- Instituto de I&D em Estruturas e Construções (CONSTRUCT) (UIDP/04708/2020)
- National funds through the FCT/MCTES (PIDDAC)
- the Fundação para a Ciência e a Tecnologia (FCT)
This publication has 21 references indexed in Scilit:
- Drying of Ceramic Bricks: Thermal and Mass Analysis via CFDDiffusion Foundations and Materials Applications, 2020
- Transient Thermal Analysis in an Intermittent Ceramic Kiln with Thermal Insulation: A Theoretical ApproachAdvances in Materials Science and Engineering, 2020
- Evaluation of red clay and ball clay drying using transient three-dimensional mathematical modeling: volumetric shrinkage and moisture contentMaterials Research Express, 2019
- Estudo Estratégico da Cadeia Produtiva da Indústria Cerâmica no Estado de São Paulo: Parte I Introdução e a Indústria de Cerâmica VermelhaCerâmica Industrial, 2019
- Heat and Mass Transfer during Drying of Clay Ceramic Materials: A Three-Dimensional Analytical StudyDiffusion Foundations and Materials Applications, 2017
- Drying kinetics of building materials capillary moistureConstruction and Building Materials, 2017
- Kinetic study of the drying process of clay bricksJournal of Thermal Analysis and Calorimetry, 2015
- Panorama da Indústria Cerâmica Brasileira na Última DécadaCerâmica Industrial, 2013
- Drying Characteristics of Oil Palm KernelsDrying Technology, 1997
- Hypergeometric Functions and Their Applications1991