José N. O. Neto
Research Subjects
Research Interests
José N. O. Neto has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Adriana B. C. Pereira
Department of Chemical Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil
1 shared publication - Antonio Gilson Barbosa de Lima
Department of Mechanical Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil
1 shared publication - Carlos José de Araújo
Federal University of Campina Grande
1 shared publication - Hortência Luma Fernandes Magalhães
Department of Chemical Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil
1 shared publication - João M. P. Q. Delgado
CONSTRUCT, Department of Civil Engineering, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal
1 shared publication - Juliana A. Figueirôa
Federal Institute of Education, Science and Technology of the Sertão Pernambucano, Petrolina 56316-686, Brazil
1 shared publication
Latest Publications
- Open Access
Heat and Mass Transfer in Structural Ceramic Blocks: An Analytical and Phenomenological Approach
The ceramic industry is one of the pillars of the Brazilian economy, characterized by making low-cost products and an obsolete manufacturing process from a technological point of view. Among the various stages of production of ceramic materials, drying is one of the most energy-consuming and, in general, causes structural damage to the product, compromising its mechanical performance and final quality. Despite the relevance, studies on the drying of ceramic materials are mostly conducted at the experimental level and limited to some specific operational conditions. In this scenario, this research aims to theoretically study the heat and mass transfers in industrial ceramic blocks during drying. Based on the lumped analysis method, and considering the dimensional variations of the material, new phenomenological mathematical models and their respective analytical solutions are proposed to describe the kinetics of mass loss and heating of the material. The predicted results referring to the thermal and gravimetric behavior of the block during the oven drying process under different conditions are compared with the experimental data, obtaining excellent agreement between the results. Furthermore, the transport coefficients were estimated, proving the dependence of these parameters on the drying air conditions. The convective mass transfer coefficient ranged from 6.69 × 10–7 to 15.97 × 10–7 m/s on the outer surface of the block and from 0.70 × 10–7 to 1.03 × 10–7 m/s on the inner surface of the material when the drying air temperature ranged from 50 to 100 °C. The convective heat transfer coefficient ranged from 4.79 to 2.04 W/(m2.°C) on the outer surface of the block and from 1.00 to 0.94 W/(m2.°C) on the inner surface of the material when air temperature ranged from 50 to 100 °C.
Open AccessHeat and Mass Transfer in Structural Ceramic Blocks: An Analytical and Phenomenological Approach
The ceramic industry is one of the pillars of the Brazilian economy, characterized by making low-cost products and an obsolete manufacturing process from a technological point of view. Among the various stages of production of ceramic materials, drying is one of the most energy-consuming and, in general, causes structural damage to the product, compromising its mechanical performance and final quality. Despite the relevance, studies on the drying of ceramic materials are mostly conducted at the experimental level and limited to some specific operational conditions. In this scenario, this research aims to theoretically study the heat and mass transfers in industrial ceramic blocks during drying. Based on the lumped analysis method, and considering the dimensional variations of the material, new phenomenological mathematical models and their respective analytical solutions are proposed to describe the kinetics of mass loss and heating of the material. The predicted results referring to the thermal and gravimetric behavior of the block during the oven drying process under different conditions are compared with the experimental data, obtaining excellent agreement between the results. Furthermore, the transport coefficients were estimated, proving the dependence of these parameters on the drying air conditions. The convective mass transfer coefficient ranged from 6.69 × 10–7 to 15.97 × 10–7 m/s on the outer surface of the block and from 0.70 × 10–7 to 1.03 × 10–7 m/s on the inner surface of the material when the drying air temperature ranged from 50 to 100 °C. The convective heat transfer coefficient ranged from 4.79 to 2.04 W/(m2.°C) on the outer surface of the block and from 1.00 to 0.94 W/(m2.°C) on the inner surface of the material when air temperature ranged from 50 to 100 °C.