Multimaterial direct energy deposition: From three-dimensionally graded components to rapid alloy development for advanced materials
Open Access
- 22 December 2022
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (1) , 012006
Abstract
Laser-based direct energy deposition (L-DED) with blown powder enables the simultaneous or sequential processing of different powder materials within one component and, thus, offers the possibility of additive multimaterial manufacturing. Therefore, the process allows a spatially resolved material allocation and fabrication of sharp or even graded material transitions. Within this contribution, the latest results from two major research fields in multimaterial L-DED—(I) automation and (II) rapid alloy development of high entropy alloys (HEAs) by in situ synthesis—shall be presented. First, an automated multimaterial deposition process was developed, which enables the automated manufacturing of three-dimensionally graded specimens. For this, a characterization of the deposition system regarding powder feeding dynamics and resulting powder mixtures in the process zone was conducted. The obtained system characteristics were used to achieve a three-dimensional deposition of specified powder mixtures. The fabricated specimens were analyzed by energy-dispersive x-ray spectroscopy, scanning electron microscopy, and micro hardness measurement. The research demonstrates the increasing readiness of L-DED for the fabrication of multimaterial components. Second, the latest results from rapid alloy development for HEAs by DED are presented. By the simultaneous usage of up to four powder feeders, a vast range of alloy compositions within the Al–Ti–Co–Cr–Fe–Ni HEA system was investigated. For this, tailored measurement systems such as an in-house developed powder sensor were beneficially used. The study shows the influence of a variation of Al on the phase formation and resulting mechanical properties and demonstrates the potential of L-DED for reducing development times for new alloys.Keywords
Funding Information
- Freistaat Sachsen
This publication has 14 references indexed in Scilit:
- Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V sectionJournal of Alloys and Compounds, 2018
- Dual-phase high-entropy alloys for high-temperature structural applicationsJournal of Alloys and Compounds, 2017
- Process characteristics in high-precision laser metal deposition using wire and powderJournal of Laser Applications, 2017
- Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: Microstructure, fusion zone morphology, and hardnessJournal of Laser Applications, 2017
- Fabrication and characterization of a functionally graded material from Ti-6Al-4V to SS316 by laser metal depositionAdditive Manufacturing, 2017
- In-situ synthesis of titanium aluminides by direct metal depositionJournal of Materials Processing Technology, 2017
- Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturingMaterials & Design, 2016
- Direct Metal Deposition of Refractory High Entropy Alloy MoNbTaWPhysics Procedia, 2016
- Review on Laser Deposition Welding: From Micro to MacroPhysics Procedia, 2012
- Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloysJournal of Alloys and Compounds, 2009