Study on the High-Temperature Reaction Kinetics of Solid Waste-Based High Belite Sulphoaluminate Cement Containing Residual Gypsum in Clinker
Open Access
Abstract
In order to elucidate the high-temperature reaction process of solid waste-based high belite sulphoaluminate cement containing residual gypsum in clinker (NHBSAC) and obtain the formation laws of each mineral in clinker, this article studied its high-temperature reaction kinetics. Through QXRD analysis and numerical fitting methods, the formation of C4A3, β-C2S, and CaSO4 in clinker under different calcination systems was quantitatively characterized, the corresponding high-temperature reaction kinetics models were established, and the reaction activation energies of each mineral were obtained. The results indicate that the content of C4A3 and β-C2S increases with the prolongation of holding time and the increase in calcination temperature, while CaSO4 is continuously consumed. Under the control mechanism of solid-state reaction, the formation and consumption of minerals follow the kinetic equation. C4A3 and β-C2S satisfy the D4 equation under diffusion mechanism control, and CaSO4 satisfies the R3 equation under interface chemical reaction mechanism control. The activation energy required for mineral formation varies with different temperature ranges. The activation energies required to form C4A3 at 1200–1225 °C, 1225–1275 °C, and 1275–1300 °C are 166.28 kJ/mol, 83.14 kJ/mol, and 36.58 kJ/mol, respectively. The activation energies required to form β-C2S at 1200–1225 °C and 1225–1300 °C are 374.13 kJ/mol and 66.51 kJ/mol, respectively. This study is beneficial for achieving flexible control of the mineral composition of NHBSAC clinker, providing a theoretical basis and practical experience for the preparation of low-carbon cement and the optimization design of its mineral composition.
Keywords
Funding Information
- National Natural Science Foundation of China (52208265, ZR2022QE185)
- Natural Science Foundation of Shandong Province (52208265, ZR2022QE185)
This publication has 26 references indexed in Scilit:
- Formation, structure, and thermal stability evolution of ternesite based on a single-stage sintering processCement and Concrete Research, 2021
- Hydration of calcium sulfoaluminate cement blended with blast-furnace slagConstruction and Building Materials, 2021
- Synergistic use of industrial solid wastes to prepare belite-rich sulphoaluminate cement and its feasibility use in repairing materialsConstruction and Building Materials, 2020
- Influence of production parameters on calcium sulfoaluminate cementsConstruction and Building Materials, 2020
- Reactivity activation of waste coal gangue and its impact on the properties of cement-based materials – A reviewConstruction and Building Materials, 2020
- Maximization of the reuse of industrial residues for the production of eco-friendly CSA-belite clinkerConstruction and Building Materials, 2019
- Research progress in advanced nanomechanical characterization of cement-based materialsCement and Concrete Composites, 2018
- Synthesis of belite sulfoaluminate-ternesite cements with phosphogypsumCement and Concrete Composites, 2015
- Effect of raw mix design and of clinkering process on the formation and mineralogical composition of (ternesite) belite calcium sulphoaluminate ferrite clinkerCement and Concrete Research, 2014
- Kinetics of calcium sulfoaluminate formation from tricalcium aluminate, calcium sulfate and calcium oxideCement and Concrete Research, 2014