Use of 3D printers to create a patient‐specific 3D bolus for external beam therapy
Authors:
Open Access
- 8 May 2015
- journal article
- Published by Wiley in Journal of Applied Clinical Medical Physics
- Vol. 16 (3) , 166-178
Abstract
The purpose of this paper is to demonstrate that an inexpensive 3D printer can be used to manufacture patient-specific bolus for external beam therapy, and to show we can accurately model this printed bolus in our treatment planning system for accurate treatment delivery. Percent depth-dose measurements and tissue maximum ratios were used to determine the characteristics of the printing materials, acrylonitrile butadiene styrene and polylactic acid, as bolus material with physical density of 1.04 and , and electron density of and , respectively. Dose plane comparisons using Gafchromic EBT2 film and the RANDO phantom were used to verify accurate treatment planning. We accurately modeled a printing material in Eclipse treatment planning system, assigning it a Hounsfield unit of 260. We were also able to verify accurate treatment planning using gamma analysis for dose plane comparisons. With gamma criteria of 5% dose difference and 2 mm DTA, we were able to have 86.5% points passing, and with gamma criteria of 5% dose difference and 3 mm DTA, we were able to have 95% points passing. We were able to create a patient-specific bolus using an inexpensive 3D printer and model it in our treatment planning system for accurate treatment delivery. PACS numbers: 87.53.Jw, 87.53.Kn, 87.56.ng
Keywords
This publication has 15 references indexed in Scilit:
- Development of patient‐specific molecular imaging phantoms using a 3D printerMedical Physics, 2014
- Design and production of 3D printed bolus for electron radiation therapyJournal of Applied Clinical Medical Physics, 2014
- Influence of electron density spatial distribution and X‐ray beam quality during CT simulation on dose calculation accuracyJournal of Applied Clinical Medical Physics, 2011
- Brain-sparing Holo-cranial Radiotherapy: a Unique Application of Helical TomotherapyClinical Oncology, 2011
- A comprehensive study of the Gafchromic EBT2 radiochromic film. A comparison with EBTMedical Physics, 2010
- 3D printing based on imaging data: review of medical applicationsInternational Journal of Computer Assisted Radiology and Surgery, 2010
- Electron conformal radiotherapy using bolus and intensity modulationInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 2002
- A custom three-dimensional electron bolus technique for optimization of postmastectomy irradiationInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 2001
- Computer-aided design and fabrication of an electron bolus for treatment of the paraspinal musclesInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 1995
- Water/air mass stopping power ratios for megavoltage photon and electron beamsPhysics in Medicine & Biology, 1978