Breaking the Range Limit of RFID Localization: Phase-based Positioning with Tunneling Tags
Authors:
- 1 April 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Abstract
The measurements reported in this work demonstrate the ability to extend the localization range of low-powered RFID tags to distances usually not achievable with conventional RFID technology. The ranging technique is performed through the Frequency Domain Phase Difference Of Arrival (FD-PDOA) method on a 5.8 GHz Tunneling Tag, both in a multipath-rich indoor environment and outdoor, at distances up to 15 meters from the reader. Range estimation errors as low as 1.95% were observed, moreover, an EIRP of only 10.5 dBm, a biasing power for the Tunneling Tag of only 21.32 μW (80 mV), and a tag antenna gain of 1 dBi suggest the potential of power-stingy Tunneling Tags to be used in low-powered RFID localization applications for very long-range scenarios.Keywords
This publication has 12 references indexed in Scilit:
- Phased-Based Composite Ranging for Backscatter RF Tags: System Analysis and MeasurementsIEEE Transactions on Antennas and Propagation, 2018
- Design and evaluation of a multi-modulation retrodirective RFID tag2018
- RFID Backscattering in Long-Range ScenariosIEEE Transactions on Wireless Communications, 2018
- Designing a Passive Retrodirective Wireless SensorIEEE Antennas and Wireless Propagation Letters, 2017
- Long range and low powered RFID tags with tunnel diode2015
- Hybrid Inertial Microwave Reflectometry for mm-Scale Tracking in RFID SystemsIEEE Transactions on Wireless Communications, 2015
- A retro-directive UHF RFID tag on paper substrate2012
- Phase based spatial identification of UHF RFID tags2010
- Complete Link Budgets for Backscatter-Radio and RFID SystemsIEEE Antennas and Propagation Magazine, 2009
- A High-Resolution, Multi-Template Deconvolution Algorithm for Time-Domain UWB Channel Characterization2007