Abstract
This work, for the first time, reports the realization of a half-wave electric dipole-like radiator using dielectric resonators. The design challenges have been systematically addressed and a C-band prototype has been realized from Al2O3 material (ϵr = 9.8, loss tangent = 0.0001) as a proof of concept. It consists of a pair of back-to-back rectangular dielectric resonators (DR) on grounded substrates. Both elements are coupled through ground-apertures and excited by a single stripline to resonate with TEδ11 mode. Strategic engineering with the ground plane (GP) has been envisaged and established as a robust technique. A standard electric dipole-like radiations have been experimentally tested revealing 3.32 dBi to 3.98 dBi gain across the matching bandwidth. Importantly, it offers about 1.2 dB-1.8 dB improvement in the gain value compared to a standard dipole. The utility of such a device would be best understood at mm-wave domain where the physical dimension of a traditional half-wave electric dipole may go below 5-6 mm. The proposed approach may offer a doable solution in such cases and an evidence has been discussed.
Funding Information
  • Scheme of Abdul Kalam Technology Innovation National Fellow of the Indian National Academy of Engineering
  • Department of Science & Technology
  • Anusandhan National Research Foundation

This publication has 20 references indexed in Scilit: