Study on the Influence of Triangular Groove Structure on Steady-State Flow Force Compensation Characteristics
Open Access
- 30 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11354
Abstract
In this study, a structurally improved spool was designed. The diameter of one side of the spool stem was reduced, making the spool stem into a rounded table shape. A triangular groove was circumscribed on the step and on the same side. After liquid flow was guided through the triangular groove, the flow direction changed. A flow component in the negative direction was generated, which reversely impacted the liquid flow in the positive direction. The liquid flow angle at the outlet increased; that is, jet angle increased and flow force decreased. The simulation results show that, increasing the depth, H, of the triangular groove has a positive effect on flow-force compensation and was conducive to the stability of the valve core. Properly increasing the groove’s bottom diameter, D1, of the triangular groove was conducive to the stability of the spool, but when D1 was too large, the flow force increased. The experimental results are consistent with the simulation results, which proves that the improved structure can effectively reduce the flow force of the spool.Keywords
Funding Information
- Industrial foundation strengthening project of the Ministry of industry and in-formation technology of the people's Republic of China (TC180A3Y1)
- National key R & D projects (2016YFD0701104)
- Major innovation projects in Shandong Province, China (2019TSLH0303)
- Key R & D plan of Shandong Province, China (2020CXGC010806, 2020CXGC011005)
- Innovation team project of colleges and universities of Jinan science and Tech-nology Bureau, Shandong Province, China (2020GXRC042)
This publication has 14 references indexed in Scilit:
- Radial Flow Force at the Annular Orifice of a Two-Dimensional Hydraulic Servo ValveIEEE Access, 2020
- Numerical Investigation of Erosion Wear in the Hydraulic Amplifier of the Deflector Jet Servo ValveApplied Sciences, 2020
- Experimental Investigation on Contaminated Friction of Hydraulic Spool ValveApplied Sciences, 2019
- Structure optimization of conical spool and flow force compensation in a diverged flow cartridge proportional valveFlow Measurement and Instrumentation, 2019
- Numerical and experimental investigation on a conical poppet relief valve with flow force compensationInternational Journal of Fluid Power, 2016
- CFD simulation of flow force reduction in hydraulic valvesTehnicki vjesnik - Technical Gazette, 2015
- Effects of groove shape of notch on the flow characteristics of spool valveEnergy Conversion and Management, 2014
- Fluid-dynamic design optimization of hydraulic proportional directional valvesEngineering Optimization, 2013
- Soft Switching Approach to Reducing Transition Losses in an On/Off Hydraulic ValveJournal of Dynamic Systems, Measurement, and Control, 2012
- Flow forces analysis of an open center hydraulic directional control valve sliding spoolEnergy Conversion and Management, 2006