QLQi Liu

Qi Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Qi Liu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the Influence of Structure and Parameters of Axial Piston Pump on Flow Pulsation

    by Ruichuan Li, Qi Liu, Yi Cheng, Jilu Liu, Qiyou Sun, Yisheng Zhang, Yurong Chi

    In view of the working principle of a swashplate axial piston pump, a simulation model of the piston pump was built in AMESim and its output flow pulsation characteristics were simulated and analyzed. We mainly analyzed the influence of the speed of the prime mover, the swashplate angle, the diameter of the piston, and port plate structure on the flow pulsation of the piston pump. The result of this research shows that the port plate structure, the swashplate angle, and the speed of the prime mover have an important influence on the flow pulsation of the piston pump. In order to effectively reduce the flow pulsation generated by the piston pump and reduce the noise generated in the process of flow distribution, the opening of the pre-compression angle and misalignment angle of the port plate of the piston pump must be reduced appropriately and the swashplate angle and the rotation speed of the prime mover should be controlled within a certain range. The flow pulsation of the axial piston pump decreases with the increase of the piston number and the decrease in the misalignment angle. The research results provide a reference for reducing the flow pulsation of the axial piston pump.


  • Design and Research of Vertical Cross Force Sensor

    by Ruichuan Li, Xinkai Ding, Qi Liu, Jilu Liu

    In this study, the piezomagnetic force sensor used in the electro-hydraulic lifting equipment of agricultural machinery is analyzed, and a vertical cross force sensor is proposed. The sensor has two excitation cores, which can detect the force at multiple shear planes at the same time. Compared with the cylindrical force sensor, the sensor has two excitation cores, and the magnetic field bias increases when the sensor is stressed. The two excitation poles are arranged vertically and crosswise, which can detect the force along the two excitation poles at the same time, which is more in line with the actual working conditions. The magnetic circuit of the sensor is analyzed and deduced. The static and dynamic performances of the sensor are analyzed by experiments. The results show that the sensitivity of the vertical cross force sensor is 2.732mV/kN, which is 277.35% higher than that of the cylindrical force sensor. The linearity of the vertical cross force sensor is 6.55%, which is 38.44% lower than that of the cylindrical force sensor. The accuracy and resolution of the vertical cross force sensor are 6.63% and 0.87kN. Compared with cylindrical force sensor, they have obvious improvement. Vertical cross force sensor has better static and dynamic performance.

  • Open Access

    Study on Piezomagnetic Effect of Iron Cobalt Alloy and Force Sensor

    by Ruichuan Li, Jilu Liu, Jikang Xu, Xinkai Ding, Yi Cheng, Qi Liu

    Based on the nonlinear piezomagnetic equation, the piezomagnetic effect of prismatic iron-cobalt alloy is analyzed by using the ANSYS finite element simulation platform. The variation of the dynamic piezomagnetic coefficient of the iron-cobalt alloy under different bias magnetic fields and different stress was studied through simulation. Referring to the working condition of the tractor force sensor and according to the principle of magnetic circuit superposition, a piezomagnetic force sensor was designed and manufactured using iron-cobalt alloy. According to the electromagnetic theory and piezomagnetic effect, the three-dimensional model and magnetic circuit mathematical model of the sensor are established, and the system simulation model of the piezomagnetic sensor was established based on the MATLAB/Simulink module. The experimental platform of the magnetostrictive force sensor was built to verify the correctness of the simulation model, and the effects of bias magnetic field and force on the output characteristics are studied. The simulation and experimental results show that the maximum piezomagnetic coefficient was 9.2 T/GPA when the bias magnetic field intensity was 14.74 kA/m. The force measuring range of the sensor is 0–120 kN, and the sensor has high sensitivity within 0–80 kN. The sensor has a simple structure, is suitable for the force measurement and control of an electro-hydraulic lifter under heavy load, and can better adapt to the harsh working environment.


  • Open Access

    Study on the Influence of Flow Distribution Structure of Piston Pump on the Output of Pulsation Pump

    by Ruichuan Li, Jilu Liu, Xinkai Ding, Qi Liu

    According to the working principle of the A10VNO swashplate axial piston pump, the output flow model of an axial piston pump in an ideal state and the output flow theoretical model of an axial piston pump considering the leakage and flow distribution process are established. The output flow pulsations of odd and even piston pumps are simulated and analyzed by Matlab, and the influence of a closed dead angle and a mismatch angle of the port plate on the output flow pulsation of the pump is obtained. Based on the theoretical model, AMESim is used to establish the overall model of the axial piston pump considering leakage, flow distribution process and oil compressibility under constant working conditions. By setting six different flow distribution boundary conditions corresponding to the theoretical research, the influence of flow distribution plate structure on pump output flow pulsation is studied. A test-bed was built and verified by experiments. The results show that when the mismatch angle of the valve plate is 3–5° and the dead angle is 6–10°, the difference between the output flow pulsations of the odd and even piston pumps is very small, so in the hydraulic pump hydraulic motor system, when the hydraulic pump is used as a hydraulic motor under the condition of power recovery, the odd number or adjacent even number of hydraulic motors are appropriate.


  • Open Access

    Design of and Research into a Multiple-Fuzzy PID Suspension Control System Based on Road Recognition

    by Xinkai Ding, Ruichuan Li, Yi Cheng, Qi Liu, Jilu Liu

    By analyzing the shortcomings of the traditional fuzzy PID(Abbreviation for Proportional, Integral and Differential) control system (FPID), a multiple fuzzy PID suspension control system based on road recognition (MFRR) is proposed. Compared with the traditional fuzzy PID control system, the multiple fuzzy control system can identify the road grade and take changes in road conditions into account. Based on changes in road conditions and the variable universe and secondary adjustment of the control parameters of the PID controller were carried out, which makes up for the disadvantage of having too many single input parameters in the traditional fuzzy PID control system. A two degree of freedom 1/4 vehicle model was established. Based on the suspension dynamic parameters, a road elevation algorithm was designed. Road grade recognition was carried out based on a BP neural network algorithm. The experimental results showed that the sprung mass acceleration (SMA) of the MFRR was much smaller than that of the passive suspension system (PS) and the FPID on single-bump and sinusoidal roads. The SMA, suspension dynamic deflection (SDD) and tire dynamic load (TDL) of the MFRR were significantly less than those of the other two systems on roads of each grade. Taking grade B road as an example, compared with the PS, the reductions in the SMA, SDD and TDL of the MFRR were 40.01%, 34.28% and 32.64%, respectively. The control system showed a good control performance.


  • Open Access

    Study on the Influence of Triangular Groove Structure on Steady-State Flow Force Compensation Characteristics

    by Ruichuan Li, Xinkai Ding, Jianghai Lin, Feng Chi, Jikang Xu, Yi Cheng, Jilu Liu, Qi Liu

    In this study, a structurally improved spool was designed. The diameter of one side of the spool stem was reduced, making the spool stem into a rounded table shape. A triangular groove was circumscribed on the step and on the same side. After liquid flow was guided through the triangular groove, the flow direction changed. A flow component in the negative direction was generated, which reversely impacted the liquid flow in the positive direction. The liquid flow angle at the outlet increased; that is, jet angle increased and flow force decreased. The simulation results show that, increasing the depth, H, of the triangular groove has a positive effect on flow-force compensation and was conducive to the stability of the valve core. Properly increasing the groove’s bottom diameter, D1, of the triangular groove was conducive to the stability of the spool, but when D1 was too large, the flow force increased. The experimental results are consistent with the simulation results, which proves that the improved structure can effectively reduce the flow force of the spool.