Mean Value Models for Exhaust System Temperatures
Author:
- 4 March 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Exhaust temperatures are important for turbine and catalyst performance. A set of exhaust temperature models suitable for turbo matching as well as design and analysis of engine control systems are developed and investigated. The models are lumped parameter heat transfer models, that fall within the category of mean value engine models. The model is developed for describing exit temperatures from the exhaust manifold and temperature drops in pipe sections in the exhaust system. The components used to model the exhaust temperature are: engine out temperature, temperature drop in a straight pipe, and a set of heat transfer modes. The model is validated using data from three different engines. It is shown that, for a spark ignited engine operating at MBT and stoichiometric conditions, it is sufficient to model the engine out temperature as a linear function of mass flow. Recommendations for tuning the model are also given. A thorough survey of exhaust heat transfer literature is also made together with a comparative summary of the different heat transfer modes that are present in the exhaust.Keywords
This publication has 13 references indexed in Scilit:
- Heat Transfer to the Combustion Chamber and Port Walls of IC Engines - Measurement and PredictionSAE International Journal of Advances and Current Practices in Mobility, 2000
- A Model for the Estimation of Inducted Air Mass and the Residual Gas Fraction using Cylinder Pressure MeasurementsSAE International Journal of Advances and Current Practices in Mobility, 2000
- Exhaust System Heat Transfer and Catalytic Converter PerformanceSAE International Journal of Advances and Current Practices in Mobility, 1999
- A Turbocharger Selection Computer ModelSAE International Journal of Advances and Current Practices in Mobility, 1999
- Prediction of Exhaust Gas Temperature at the Inlet of an Underbody Catalytic Converter During FTP-75 TestSAE International Journal of Advances and Current Practices in Mobility, 1997
- Correlation of Engine Heat Transfer for Heat Rejection and Warm-Up ModellingSAE International Journal of Advances and Current Practices in Mobility, 1997
- Automobile Exhaust-System Steady-State Heat TransferSAE International Journal of Advances and Current Practices in Mobility, 1993
- A Numerical Model for Thermal Problems in Exhaust SystemsSAE International Journal of Advances and Current Practices in Mobility, 1993
- A Study of Warm-Up Processes in SI Engine Exhaust SystemsSAE International Journal of Advances and Current Practices in Mobility, 1993
- Computer Simulation of Intake and Exhaust Manifold Flow and Heat TransferSAE International Journal of Advances and Current Practices in Mobility, 1986