Grain Growth during Mechanical Processing of Austenitic Stainless Steel AISI 321
Open Access
Abstract
The kinetics of austenite grain growth during thermomechanical treatment of AISI 321 steel with a relatively high content of carbon (0.07 wt. %) and titanium (0.50 wt. %) were studied. Hot deformation was carried out by the uniaxial compression of cylindrical specimens on a Gleeble 3800 thermomechanical simulator. A dependence is obtained for calculating the kinetics of austenite grain growth for a temperature range of 1150–1250 °C. The proposed dependence makes it possible to evaluate grain growth under non-isothermal conditions. The verification of the adequacy of the proposed dependence and the method for calculating the grain size at cooling rates 0.2, 1 and 5 °C/s showed its high convergence. The difference between the calculated and experimental grain size did not exceed 8%. The suppression of grain growth is due to the precipitation of titanium carbides and carbonitrides. Using the developed grain growth model, an analysis was made of the reasons for the formation of large grains in the shell after the elongating in the production process.Keywords
This publication has 34 references indexed in Scilit:
- β Grain Growth Kinetics of a New Metastable β Titanium AlloyMaterials Science Forum, 2013
- Influence of State of Stress on Dynamic Recrystallization in a Titanium-Modified Austenitic Stainless SteelMetallurgical and Materials Transactions A, 2011
- Kinetics of grain growth in 2024-T3: An aerospace aluminum alloyJournal of Alloys and Compounds, 2009
- Effects of solution heat treatment on grain growth and degree of sensitization of AISI 321 austenitic stainless steelJournal of Materials Science, 2006
- Non-isothermal grain growth in metals and alloysMaterials Science and Technology, 2006
- Prediction Model for the Austenite Grain Size in the Coarse Grained Heat Affected Zone of Fe-C-Mn Steels: Considering the Effect of Initial Grain Size on Isothermal Growth BehaviorISIJ International, 2004
- Grain Growth Predictions in Microalloyed Steels.ISIJ International, 1996
- Recrystallization and grain growth in metastable beta III titanium alloyMetallurgical Transactions A, 1979
- Recrystallization and grain growth in hot rollingMetal Science, 1979
- On the theory of normal and abnormal grain growthActa Metallurgica, 1965