Characterizing the Internal Flow Behavior of Spray Pulsating Operation in Internal-Mixing Y-Jet Atomizers
Open Access
Abstract
The production of a stable and uniform spray is a primary concern in fuel atomization applications, such as in fluid catalytic cracking reactors, directly affecting the process quality and gas emissions. However, depending on nozzle geometry and operating conditions, undesired pulsed spray behavior may occur. This phenomenon originates from the internal multiphase flow interaction in Y-jet nozzles and leads to unstable sprays. Understanding the formation of spray pulsations is challenging due to limited internal flow visualization in the nozzle and the fast dynamics involved. Accordingly, this work elucidates the mechanisms of the pulsed spray formation through 3D transient numerical multiphase simulations inside a mixing chamber. The model is validated against internal pressure measurements and applied to investigate the internal mixing behavior across several operating conditions. Results show that the liquid-to-gas momentum flux ratio governs the internal flow regimes. A higher liquid momentum flux obstructs the gas flow, leading to periodic spray bursts when the gas overcomes the liquid back pressure. The simulations also reveal self-sustained oscillatory flow patterns and cyclic transitions between gas penetration and liquid accumulation, which produce periodic pressure fluctuations and nozzle discharge pulsations. The findings offer valuable guidance for optimizing nozzle operation and geometry to suppress pulsation and improve atomization performance.Keywords
Funding Information
- Petrobras (5850.0107354.18.9)
This publication has 24 references indexed in Scilit:
- Time-Averaged Analysis and Numerical Modelling of the Behavior of the Multiphase Flow and Liquid Lamella Thickness Inside an Internal-Mixing ACLR NozzleFlow, Turbulence and Combustion, 2023
- Visualization study of annular sheet breakup dynamics in sonic twin-fluid atomizersJournal of Visualization, 2022
- Experimental study of a heavy fuel oil atomization by pressure-swirl injector in the application of entrained flow gasifierChinese Journal of Chemical Engineering, 2019
- Low-pressure twin-fluid atomization: Effect of mixing process on spray formationInternational Journal of Multiphase Flow, 2017
- Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet sizeInternational Journal of Multiphase Flow, 2015
- Reduction of pollutant emissions from a rapeseed oil fired micro gas turbine burnerFuel Processing Technology, 2015
- Analysis and prediction of the spray produced by an internal mixing chamber twin-fluid nozzleFuel Processing Technology, 2014
- Design optimization of twin-fluid atomizers with an internal mixing chamber for heavy fuel oilsFuel Processing Technology, 2009
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981
- A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flowsInternational Journal of Heat and Mass Transfer, 1972