Design of a Compact Dual-Band Absorptive Single-Pole Double-Throw Switch
Authors:
- 7 April 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 5, 90-93
Abstract
In this letter, a compact dual-band absorptive single-pole double-throw (SPDT) switch design is proposed. It utilizes the bridged-T coil as a miniaturized dual-band $\lambda /4$ transformer such that the concurrent dual-band operation in the on-state and the desired absorptive property in the off-state can be both achieved. The proposed design concept is validated through a 2.45/5.8-GHz dual-band absorptive SPDT switch design implemented in a commercial GaAs pHEMT process. The measured on-state insertion loss is 1.54/1.97 dB and the off-state isolation is 35/29 dB at 2.45/5.8 GHz, while the measured return losses at all ports are better than 20 dB at 2.45/5.8 GHz. In addition, a compact chip size of 2.0 mm $\times $ 1.5 mm is achieved.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 109-2221-E-008-064, MOST 110-2221-E-008-031-MY2)
- National Center for Highperformance Computing, Taiwan
- Taiwan Semiconductor Research Institute, Taiwan
This publication has 12 references indexed in Scilit:
- A 28-GHz Reconfigurable SP4T Switch Network for a Switched Beam System in 65-nm CMOSIEEE Transactions on Microwave Theory and Techniques, 2020
- Single-/Dual-Band Bandpass Filter-Integrated Single-Pole Double-Throw Switch Using Distributed Coupling Tri-Mode ResonatorsIEEE Transactions on Microwave Theory and Techniques, 2019
- Miniature Dual-Band Quadrature Coupler With Arbitrary Power Division Ratios Over the Two BandsIEEE Transactions on Circuits and Systems I: Regular Papers, 2019
- A $Ka$ -Band GaAs MMIC Traveling-Wave Switch With Absorptive CharacteristicIEEE Microwave and Wireless Components Letters, 2019
- Sharp Skirt Bandpass Filter-Integrated Single-Pole Double-Throw Switch With Absorptive OFF-StateIEEE Transactions on Microwave Theory and Techniques, 2018
- Bridged-T Coil for Miniature Dual-Band Branch-Line Coupler and Power Divider DesignsIEEE Transactions on Microwave Theory and Techniques, 2017
- 2.4-GHz Absorptive MMIC Switch for Switched Beamformer ApplicationIEEE Transactions on Microwave Theory and Techniques, 2017
- The Bridged T-Coil [A Circuit for All Seasons]IEEE Solid-State Circuits Magazine, 2015
- Miniature Butler Matrix Design Using Glass-Based Thin-Film Integrated Passive Device Technology for 2.5-GHz ApplicationsIEEE Transactions on Microwave Theory and Techniques, 2013
- High-Linearity K-Band Absorptive-Type MMIC Switch Using GaN PIN-DiodesIEEE Microwave and Wireless Components Letters, 2013