Investigating the Reactive Reinforcement Ability of Maleic Anhydride-Modified Cellulose Nanocrystals via In-Situ Emulsion Polymerization
Open Access
- 26 July 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (31) , 33386-33396
Abstract
CNC-based nanocomposites have gained substantial interest because of their enhanced thermomechanical properties for high-end engineering applications. The chemical modification of CNCs expands their applicability, making them suitable for use in hydrophobic polymer matrices. The current study investigates the reactive reinforcing ability of maleic anhydride-modified cellulose nanocrystals during the in situ polymerization of a vinyl monomer, i.e., styrene. Highly crystalline nanocellulose (CNCBG) was isolated from Lagenaria siceraria (Bottle gourd) peels via Hydrochloric acid, which was further modified to synthesize maleic anhydride-modified cellulose nanocrystals (MACNCBG) and characterized employing various techniques. MACNCBG exhibited higher suspension stability than CNCBG due to the introduction of carboxyl groups. Furthermore, polystyrene-based nanocomposites of 3 and 5 wt % filler loading were prepared, respectively. While PSMACNCBG (5 wt %) displayed a premature failure, PSMACNCBG (3 wt %) demonstrated enhanced mechanical properties compared to PSCNCBG (3 wt %) and PS. At the same filler loading, MACNCBG demonstrated a more remarkable reinforcing ability than CNCBG, owing to its reactive tendency. The appearance of a new peak between 3000-2800 cm(-1) corresponds to the C-H stretching of the formed C-C bond (between C=C of MACNCBG and benzal carbon of PS) in the FTIR spectra, confirming the reactive nature of MACNCBG.Keywords
Funding Information
- Anusandhan National Research Foundation (CRG/2021/004515)
- Ministry of Education, India
This publication has 53 references indexed in Scilit:
- Structural and morphological exploration of cellulose nanocrystals extracted from lignocellulosic waste biomass of Brassica nigra (mustard straw)Biomass Conversion and Biorefinery, 2023
- Surface modification of zirconia by various modifiers to investigate its reinforcing efficiency toward nitrile rubberPolymer Composites, 2022
- Generating crosslinking network in XNBR based on copper (I)–carboxylate interactionPolymers for Advanced Technologies, 2022
- The role of rheological premonitory of hydrogels based on cellulose nanofibers and polymethylsilsesquioxane on the physical properties of corresponding aerogelsPolymer Engineering & Science, 2021
- Synthesis and chemical modification of crystalline nanocellulose to reinforce natural rubber compositesPolymers for Advanced Technologies, 2020
- Surface modification of cellulose nanocrystal using succinic anhydride and its effects on poly(butylene succinate) based compositesCellulose, 2019
- Effectiveness of cellulosic Agave angustifolia fibres on the performance of compatibilised poly(lactic acid)-natural rubber blendsCellulose, 2019
- Effective Interfacially Polymerized Polyester Solvent Resistant Nanofiltration Membrane from Bioderived MaterialsAdvanced Sustainable Systems, 2018
- A comparison between polyethylene glycol (PEG) and polypropylene glycol (PPG) treatment on the properties of nano-titanium dioxide (TiO2) based natural rubber (NR) nanocompositesPolymer Bulletin, 2016
- Heavy metal ions and organic dyes removal from water by cellulose modified with maleic anhydrideJournal of Materials Science, 2012