A review of failure of sintered steels: fractography of static and dynamic crack nucleation, coalescence, growth and propagation
- 14 March 2016
- journal article
- review article
- Published by SAGE Publications in Powder Metallurgy
- Vol. 59 (2) , 148-167
Abstract
The failure of sintered steels differs from the behaviour of wrought steels because of factors such as porosity, remnants of previous particle surfaces and generally more complex microstructures. All these factors influence initiation, growth and propagation of microcracks when the sintered microstructure is mechanically loaded. Fracture paths and fracture resistance are shown to be related to details of the microstructures comprising ferrite, austenite, bainite, martensite, pores and weak interfaces. All these have characteristic fracture resistance properties resulting in, frequently combinations of, dimple rupture, cleavage, intergranular and interparticle failure micromechanisms. Results are presented of systematic studies, enabling identification of relevant stresses, in static and dynamic three-point loading, as the cracking process progresses. In static loading, microcracking has been detected in some steels below the macroscopic yield stress and in the first 100 cycles in fatigue. Microcracks nucleate, grow and coalesce, in a step-wise manner, before achieving a catastrophic size – for which conventional fracture mechanics holds. Thus, application of Paris-type analysis to Stage II fatigue is therefore inappropriate. The review focuses on failure micromechanisms and interpretation of fracture surface composition of sintered steels, particularly of those based on Distaloy AE and Astaloy CrL powders. The relationships between microstructure and mechanical properties are discussed.Keywords
This publication has 30 references indexed in Scilit:
- Effect of Bainite Morphology on Mechanical Properties of the Mixed Bainite-martensite Microstructure in D6AC SteelJournal of Materials Science & Technology, 2012
- Microcrack nucleation, growth, coalescence and propagation in the fatigue failure of a powder metallurgy steelFatigue & Fracture of Engineering Materials & Structures, 2009
- Fracture behavior of austenitic stainless steels irradiated in PWRJournal of Nuclear Materials, 2008
- On the Microstructure and Fracture Surface of Bainite in JIS SK5 SteelSolid State Phenomena, 2006
- Microstructure and mechanical behavior of porous sintered steelsMaterials Science and Engineering: A, 2005
- The influence of defects on high cycle fatigue of metallic materialsJournal of Materials Processing Technology, 2003
- SMALL FATIGUE CRACKS IN AN AUSTENITIC STAINLESS STEELFatigue & Fracture of Engineering Materials & Structures, 1998
- Heat Treated Martensitic Steels: Microstructural Systems for Advanced Manufacture.ISIJ International, 1995
- Fracture stability, R-curves and strength variabilityActa Metallurgica, 1988
- Crack-Extension Force for a Part-Through Crack in a PlateJournal of Applied Mechanics, 1962