Single-frame dynamic PIV mask generation based on local particles per pixel distribution
Authors:
- Rodrigo de Lima AmaralRARodrigo de Lima Amaral
- Bernardo Luiz Harry Diniz LemosBLBernardo Luiz Harry Diniz Lemos
- Vítor Augusto Andreghetto BortolinVBVítor Augusto Andreghetto Bortolin
- João Lameu Silva JuniorJJJoão Lameu Silva Junior
- Julio Romano MeneghiniJMJulio Romano Meneghini
- Helder Lima de MouraHMHelder Lima de Moura
- 18 August 2026
- journal article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (33) , 335403
Abstract
In practical particle image velocimetry (PIV) applications, severe noise and dynamic optical artifacts—such as sharp shadows, intense specular reflections, transient occlusions, and non-uniform illumination—critically degrade particle-to-background separation and yield regions with highly unreliable correlation peaks. Under these extreme conditions, dynamic mask generation is essential to restrict the interrogation to the physically valid domain and to suppress spurious vectors. This work introduces a robust dynamic masking method based on the local particles-per-pixel (ppp) distribution, derived entirely from a single frame. This single-frame architecture makes the method applicable even when stationary-background assumptions are untenable or long time series are unavailable. The proposed pipeline comprises (i) an optional algorithmically simple pre-processing, (ii) tracer identification, (iii) spatial aggregation to construct the ppp field, (iv) smoothing and segmentation, and (v) morphological corrections for boundary refinement. A controlled synthetic analysis isolates typical degradation mechanisms and provides an objective basis for parameter selection. Finally, the approach is stress-tested on three highly noisy, dynamic experimental cases: a pediatric ventricular assist device, a multiphase bubble column, and the undulating boundary of an anguilliform swimming fish. The proposed pipeline is quantitatively benchmarked against the standard peak correlation energy (PCE) masking approach. Results demonstrate that while the PCE approach fails in regions of severe shadowing and continuous boundary deformation, the single-frame ppp method systematically isolates these optical failures. Evaluations of the probability density functions of the primary peak ratio confirm that the proposed mask substantially reduces low- signal-to-noise ratio spurious vectors, significantly enhancing global correlation fidelity while maintaining stable frame-by-frame application after parameter selection.Keywords
This publication has 23 references indexed in Scilit:
- PIV measurements within roughness grooves with enhanced wall reflection suppressionExperiments in Fluids, 2025
- An automatic static masking technique using Particle Image Velocimetry image ensemblesExperimental Thermal and Fluid Science, 2021
- A dynamic masking technique for particle image velocimetry using convolutional autoencodersExperiments in Fluids, 2020
- Automated mask generation for PIV image analysis based on pixel intensity statisticsExperiments in Fluids, 2017
- Using chaos analysis for evaluating the quality of F-PIV measurements in a bubble columnChemical Engineering Science, 2017
- POD-based background removal for particle image velocimetryExperimental Thermal and Fluid Science, 2017
- Automatic dynamic mask extraction for PIV images containing an unsteady interface, bubbles, and a moving structureComptes Rendus Mécanique, 2016
- Dynamic masking of PIV images using the Radon transform in free surface flowsExperiments in Fluids, 2011
- On image pre-processing for PIV of single- and two-phase flows over reflecting objectsExperiments in Fluids, 2010
- On improvement of PIV image interrogation near stationary interfacesExperiments in Fluids, 2008