Adjustment of fracture locus to improve edge crack resistance
Authors:
Open Access
- 1 May 2022
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1238 (1)
Abstract
Edge crack sensitivity of advanced high strength steels is posing challenges in forming the sheets with shear-cut edges. In fact, cutting process reduces formability of material by leaving residual damage at the cut edges and makes it prone to edge cracking. The difficulty of the problem mainly lies in the complex loading path that sheets undergo through shear-cutting and the subsequent forming processes. In other words, the stress state evolves from pure-shear to plane-strain during cutting process and changes to mostly uniaxial tension during the following hole-expansion test. The present study aimed to investigate the physical mechanism underlying the formation of edge cracks. The overall aim of the study is to tailor an improved microstructural configuration leading to a significantly reduced edge crack sensitivity. As a first step in this process, an artificial fracture locus is iteratively identified which promises to improve edge crack resistance. In this regard, a dual phase steel was considered as reference material and its fracture locus was calibrated based on uncoupled Bai-Wierzbicki fracture model. The artificial fracture locus representing a virtual material with improved edge crack resistance changed in a way that lower residual damage was inherited from the cutting process, which consequently improved the hole-expansion ratio.Keywords
This publication has 6 references indexed in Scilit:
- The effects of shear affected zone on edge crack sensitivity in dual-phase steelsIOP Conference Series: Materials Science and Engineering, 2019
- Numerical quantification of damage accumulation resulting from blanking in multi-phase steelIOP Conference Series: Materials Science and Engineering, 2018
- Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSSMetallurgical and Materials Transactions A, 2016
- FE simulation of edge fracture considering pre-damage from blanking processInternational Journal of Solids and Structures, 2015
- Experiments and modeling of edge fracture for an AHSS sheetInternational Journal of Fracture, 2014
- A new model of metal plasticity and fracture with pressure and Lode dependenceInternational Journal of Plasticity, 2008