High-gain low-excess-noise MWIR detection with a 3.5-µm cutoff AlInAsSb-based separate absorption, charge, and multiplication avalanche photodiode
Open Access
- 1 March 2023
- journal article
- conference paper
- Published by AIP Publishing in APL Photonics
- Vol. 8 (3)
Abstract
Mid-wavelength infrared detection is useful for a variety of scientific and military applications. Avalanche photodiodes can provide an advantage for detection as their internal gain mechanism can increase the system signal-to-noise ratio of a receiver. We demonstrate a separate absorption, charge, and multiplication avalanche photodiode using a digitally-grown narrow-bandgap Al0.05InAsSb absorber for MWIR detection and a wide bandgap Al0.7InAsSb multiplier for low-excess-noise amplification. Under 2-μm illumination at 100 K the device can reach gains over 850. The excess noise factor of the device scales with a low k-factor of ~0.04. The unity-gain external quantum efficiency of the device peaks at 54% (1.02 A/W) at 2.35 μm and maintains an efficiency of 24% (0.58 A/W) at 3 μm before cutting off at ~3.5 μm. At a gain of 850 the device has a gain-normalized dark current density of 0.05 mA/cm2. This device achieves gains more than double state-of-the-art InAs detectors and gain-normalized dark current densities over two orders of magnitude lower than a previously reported MWIR Al0.15InAsSb-based detector.Keywords
Funding Information
- Army Research Office (W911NF-17-1-0065)
- Defense Advanced Research Projects Agency (W911NF-17-1-0065, W909MY-12-D-0008)
This publication has 27 references indexed in Scilit:
- Broadly Tunable AlInAsSb Digital Alloys Grown on GaSbCrystal Growth & Design, 2016
- Low-noise AlInAsSb avalanche photodiodeApplied Physics Letters, 2016
- High-Gain InAs Planar Avalanche PhotodiodesJournal of Lightwave Technology, 2016
- Progress, challenges, and opportunities for HgCdTe infrared materials and detectorsApplied Physics Reviews, 2015
- The Mid-Infrared Instrument for theJames Webb Space Telescope, VII: The MIRI DetectorsPublications of the Astronomical Society of the Pacific, 2015
- Performance of Mid-Wave Infrared HgCdTe e-Avalanche PhotodiodesJournal of Electronic Materials, 2012
- HgCdTe avalanche photodiodes: A reviewOptics & Laser Technology, 2011
- Avalanche photodiode punch-through gain determination through excess noise analysisJournal of Applied Physics, 2009
- Optical functions from 0.02 to 6 eV of AlxGa1−xSb/GaSb epitaxial layersJournal of Applied Physics, 1998
- Excess noise in silicon avalanche photodiodesJournal of Applied Physics, 1976