Computational methods for leakage localisation in a vacuum bag using volumetric flow rate measurements
Open Access
- 12 April 2022
- journal article
- research article
- Published by Springer Nature in Production Engineering
- Vol. 16 (6) , 823-835
Abstract
The localisation of leakages during the vacuum bagging process of a composite is currently time intensive and reliant on human labour. The purpose of this article is to explore four computational methods for leakage localisation using volumetric flow rate (VFR) data to increase the automation of the process. The data used in this article is based on experiments on a square vacuum bag with four vacuum ports. The first method is based on potential flow theory to simulate the flow. In the second method, numerical regression was applied to find a relation between the VFRs and port-leakage distances. The third method consisted of calculating the fractional VFRs for every point on a grid and finding the grid point whose values most closely correspond to the observed fractional VFRs. The last method involved training a machine learning algorithm with experimental data. After the development of the methods, their performance was tested over the entire single-leakage dataset and compared. The results were in the same order of magnitude for all methods, with an area of $$10^5$$ mm $$^2$$ for the 95% confidence interval and a distance of $$10^2$$ mm for the average error. Further research is required for application to different vacuum bag shapes and multiple leakages cases. The method with the highest adaptability and performance is the method based on potential-flow theory. Machine learning and the potential-flow method is further applicable to multiple leakage localisation.
Keywords
Funding Information
- Deutsches Zentrum für Luft- und Raumfahrt
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)
This publication has 6 references indexed in Scilit:
- Sensor-based leakage detection in vacuum baggingThe International Journal of Advanced Manufacturing Technology, 2021
- Two-stage leak detection in vacuum bags for the production of fibre-reinforced composite componentsCEAS Aeronautical Journal, 2019
- 2.3 Autoclave Processing2018
- Causes and remedies for porosity in composite manufacturingIOP Conference Series: Materials Science and Engineering, 2016
- A review of out-of-autoclave prepregs – Material properties, process phenomena, and manufacturing considerationsComposites Part A: Applied Science and Manufacturing, 2015
- Newton’s method and its use in optimizationEuropean Journal of Operational Research, 2007