Anja Haschenburger
Anja Haschenburger has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Jan Stüve
DLR e.V., Institute for Composite Structures and Adaptive Systems, Stade, Germany
2 shared publicationsNiklas Menke
DLR e.V., Institute for Composite Structures and Adaptive Systems, Stade, Germany
2 shared publications- A. Osis
Faculty of Aerospace Engineering, TU Delft, Delft, Netherlands
1 shared publication A. R. S. Bracke
Faculty of Aerospace Engineering, TU Delft, Delft, Netherlands
1 shared publicationC. Heim
Airbus Operations GmbH Stade
1 shared publicationD. S. Taraczky
Faculty of Aerospace Engineering, TU Delft, Delft, Netherlands
1 shared publication
Latest Publications
- Open Access
- 12 April 2022
- Published by Springer Nature in Production Engineering
- Vol. 16 (6) , 823-835
Computational methods for leakage localisation in a vacuum bag using volumetric flow rate measurements
The localisation of leakages during the vacuum bagging process of a composite is currently time intensive and reliant on human labour. The purpose of this article is to explore four computational methods for leakage localisation using volumetric flow rate (VFR) data to increase the automation of the process. The data used in this article is based on experiments on a square vacuum bag with four vacuum ports. The first method is based on potential flow theory to simulate the flow. In the second method, numerical regression was applied to find a relation between the VFRs and port-leakage distances. The third method consisted of calculating the fractional VFRs for every point on a grid and finding the grid point whose values most closely correspond to the observed fractional VFRs. The last method involved training a machine learning algorithm with experimental data. After the development of the methods, their performance was tested over the entire single-leakage dataset and compared. The results were in the same order of magnitude for all methods, with an area of $$10^5$$ mm $$^2$$ for the 95% confidence interval and a distance of $$10^2$$ mm for the average error. Further research is required for application to different vacuum bag shapes and multiple leakages cases. The method with the highest adaptability and performance is the method based on potential-flow theory. Machine learning and the potential-flow method is further applicable to multiple leakage localisation.- 12 April 2022
- Published by Springer Nature in Production Engineering
- Vol. 16 (6) , 823-835
Open AccessComputational methods for leakage localisation in a vacuum bag using volumetric flow rate measurements
The localisation of leakages during the vacuum bagging process of a composite is currently time intensive and reliant on human labour. The purpose of this article is to explore four computational methods for leakage localisation using volumetric flow rate (VFR) data to increase the automation of the process. The data used in this article is based on experiments on a square vacuum bag with four vacuum ports. The first method is based on potential flow theory to simulate the flow. In the second method, numerical regression was applied to find a relation between the VFRs and port-leakage distances. The third method consisted of calculating the fractional VFRs for every point on a grid and finding the grid point whose values most closely correspond to the observed fractional VFRs. The last method involved training a machine learning algorithm with experimental data. After the development of the methods, their performance was tested over the entire single-leakage dataset and compared. The results were in the same order of magnitude for all methods, with an area of $$10^5$$ mm $$^2$$ for the 95% confidence interval and a distance of $$10^2$$ mm for the average error. Further research is required for application to different vacuum bag shapes and multiple leakages cases. The method with the highest adaptability and performance is the method based on potential-flow theory. Machine learning and the potential-flow method is further applicable to multiple leakage localisation. - Open Access
- 9 July 2021
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 116 (7-8) , 2413-2424
Sensor-based leakage detection in vacuum bagging
A majority of aircraft components are nowadays manufactured using autoclave processing. Essential for the quality of the component is the realization of an airtight vacuum bag on top of the component to be cured. Several ways of leakage detection methods are actually used in industrial processes. They will be dealt with in this paper. A special focus is put on a new approach using flow meters for monitoring the air flow during evacuation and curing. This approach has been successfully validated in different trials, which are presented and discussed. The main benefit of the method is that in case of a leakage, a defined limit is exceeded by the volumetric flow rate whose magnitude can be directly correlated to the leakage’s size and position. In addition, the potential of this method for the localization of leakages has been investigated and is discussed.
- 9 July 2021
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 116 (7-8) , 2413-2424
Open AccessSensor-based leakage detection in vacuum bagging
A majority of aircraft components are nowadays manufactured using autoclave processing. Essential for the quality of the component is the realization of an airtight vacuum bag on top of the component to be cured. Several ways of leakage detection methods are actually used in industrial processes. They will be dealt with in this paper. A special focus is put on a new approach using flow meters for monitoring the air flow during evacuation and curing. This approach has been successfully validated in different trials, which are presented and discussed. The main benefit of the method is that in case of a leakage, a defined limit is exceeded by the volumetric flow rate whose magnitude can be directly correlated to the leakage’s size and position. In addition, the potential of this method for the localization of leakages has been investigated and is discussed.
- Open Access
- 24 February 2021
- Published by Springer Nature in Research Square
Sensor Based Leakage Detection in Vacuum Bagging
The majority of aircraft components are nowadays manufactured using autoclave processing. Essential for the quality of the component is the realization of an air tight vacuum bag on top of the component to be cured. Several ways of leakage detection methods are actually used in industrial processes. They will be dealt with in this paper. A special focus is put on a new approach using flow meters for monitoring the air flow during evacuation and curing. This approach has been successfully validated in different trials, which are presented and discussed. The main benefit of the method is that in case of a leakage, a defined limit is exceeded by the volumetric flow rate whose magnitude can be directly correlated to the leakage’s size and position. In addition the potential of this method for the localization of leakages has been investigated and is discussed.
- 24 February 2021
- Published by Springer Nature in Research Square
Open AccessSensor Based Leakage Detection in Vacuum Bagging
The majority of aircraft components are nowadays manufactured using autoclave processing. Essential for the quality of the component is the realization of an air tight vacuum bag on top of the component to be cured. Several ways of leakage detection methods are actually used in industrial processes. They will be dealt with in this paper. A special focus is put on a new approach using flow meters for monitoring the air flow during evacuation and curing. This approach has been successfully validated in different trials, which are presented and discussed. The main benefit of the method is that in case of a leakage, a defined limit is exceeded by the volumetric flow rate whose magnitude can be directly correlated to the leakage’s size and position. In addition the potential of this method for the localization of leakages has been investigated and is discussed.
- 1 January 2021
- Published by Carl Hanser Verlag in Zeitschrift Kunststofftechnik
- Vol. 1
Influence of leaky vacuum bags on the quality of composite parts made from prepreg material
- 1 January 2021
- Published by Carl Hanser Verlag in Zeitschrift Kunststofftechnik
- Vol. 1
Influence of leaky vacuum bags on the quality of composite parts made from prepreg material
- 19 January 2019
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 10 (3) , 885-892
Two-stage leak detection in vacuum bags for the production of fibre-reinforced composite components
- 19 January 2019
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 10 (3) , 885-892
Two-stage leak detection in vacuum bags for the production of fibre-reinforced composite components