Effect of Q235 Hot-Dip Galvanized and Post-Casting T6 Heat Treatment on Microstructure and Mechanical Properties of Interfacial between AZ63 and Q235 by Solid-Liquid Compound Casting
Open Access
Abstract
AZ63 sacrificial anode is widely used to protect buried metal pipelines and reinforced concrete structures and so on. The interfacial metallurgical bonding between AZ63 sacrificial anode and Q235 wiring terminal directly affects its cathodic protection performance. Therefore, microstructure and mechanical properties of interfacial between AZ63 and Q235 by solid–liquid compound casting with hot-dip galvanized and post-casting solution-aging treatment (T6) were investigated. The results indicate that hot-dip galvanizing on the surface of Q235 is beneficial to the formation of intermetallic compounds at the interface. At the same time, it can promote the metallurgical bonding of the interface between AZ63 and Q235. After T6 heat treatment, the intermetallic compound at the interface between AZ63 and galvanized Q235 was refined. The electron-probe microanalyzer (EPMA) revealed that the intermetallic compounds at the interfaces between AZ63 and galvanized Q235 were Fe2Al5 before and after T6 treatment. Push-out testing and microhardness were used to investigate the mechanical properties of interface between AZ63 and Q235. It is shown that the hot-dip galvanization of the Q235 surface and T6 treatment were beneficial to improve the metallurgical bonding shear strength and microhardness of the interface. After T6 heat treatment, the highest shear strength at the interface between AZ63 and galvanized Q235 was up to 31.9 ± 1.9 MPa.Keywords
Funding Information
- Natural Science Foundation of Chongqing, China (cstc2020jcyj-msxmX0544, cstc2021ycjh-bgzxm0185, KJQN202001416, KJZD-K202001502, 52001028, X202210647008)
- Scientific and Technological Research Program of Chongqing Municipal Education Commission (cstc2020jcyj-msxmX0544, cstc2021ycjh-bgzxm0185, KJQN202001416, KJZD-K202001502, 52001028, X202210647008)
- National Natural Science Foundation of China (cstc2020jcyj-msxmX0544, cstc2021ycjh-bgzxm0185, KJQN202001416, KJZD-K202001502, 52001028, X202210647008)
- Innovation and Entrepreneurship Training Program for College Students of Yangtze Normal University (cstc2020jcyj-msxmX0544, cstc2021ycjh-bgzxm0185, KJQN202001416, KJZD-K202001502, 52001028, X202210647008)
This publication has 20 references indexed in Scilit:
- Formation of zinc interlayer texture during dissimilar ultrasonic spot welding of magnesium and high strength low alloy steelMaterials & Design (1980-2015), 2013
- Magnesium-Based Sacrificial Anode Cathodic Protection Coatings (Mg-Rich Primers) for Aluminum AlloysMetals, 2012
- Microstructural characteristics of lap joint between magnesium alloy and mild steel with and without the addition of Sn elementMaterials Letters, 2010
- Effect of thermomechanical treatment on microstructure and hardness behavior of AZ63 magnesium alloyActa Metallurgica Sinica (English Letters), 2009
- Friction Stir Lap Welding of Magnesium Alloy and Zinc-Coated SteelMATERIALS TRANSACTIONS, 2009
- Cathodic protection of steel in concrete using magnesium alloy anodeCorrosion Science, 2008
- Local reinforcement of magnesium base castings with mild steel insertsMaterials Science and Engineering: A, 2007
- Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying ElementMATERIALS TRANSACTIONS, 2005
- Effect of Alloying Elements on Electrochemical Properties of Magnesium-Based Sacrificial AnodesCorrosion, 2000
- The Fe−Mg (Iron-Magnesium) systemBulletin of Alloy Phase Diagrams, 1985