Jiahong Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiahong Dai has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Bin Jiang
National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing, China
4 shared publications - Jianyue Zhang
Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210, USA
2 shared publications - Qingshan Yang
School of Civil Engineering, Chongqing University, Chongqing 400044, China
2 shared publications - Cheng Peng
College of Materials Science and Engineering, Yangtze Normal University, Chongqing 408102, China
1 shared publication Guo-Qing Zhang
College of Materials Science and Engineering, Yangtze Normal University, Chongqing, China
1 shared publication- Haochuan Wan
School of Robot Engineering, Yangtze Normal University, Chongqing 408100, China
1 shared publication
Latest Publications
- Open Access
Effect of Hot-Dipped Tin Coating Treatment on Metallurgical Bonds Between AZ91D and Cu by Composite Casting
Mg-Cu bimetallic materials have been widely studied because of their low density, good electrical conductivity, and excellent hydrogen storage properties. However, the interface bonding strength of Mg/Cu is low. In this study, we examined the effect of hot-dip tin coating (HDTC) with copper (Cu) on the interfacial metallurgical bonds between AZ91D Magnesium (Mg) alloy and Cu composite casting. A transition layer composed of Mg2Cu and MgCu2 intermetallic compounds (IMCs) formed at the interface of the AZ91D/HDTC-Cu composite casting. However, the transition layer was about 1 μm at the AZ91D/Cu interface, mainly comprising Mg(Al, Cu)2 IMC. Both the AZ91D/Cu and AZ91D/HDTC-Cu interfaces exhibited many labyrinthine Mg(Al, Cu)2 IMCs and layer-like Mg2(Al, Cu) IMCs. Moreover, the interfacial shear strength of the AZ91D/Cu was changed from 12.6 MPa to 52.4 MPa due to the solid solution of Sn atom and the precipitation of Mg2Sn IMC at the interface after HDTC treatment. Meanwhile, the shear fracture surfaces are characterized by brittle fractures.
Open AccessEffect of Hot-Dipped Tin Coating Treatment on Metallurgical Bonds Between AZ91D and Cu by Composite Casting
Mg-Cu bimetallic materials have been widely studied because of their low density, good electrical conductivity, and excellent hydrogen storage properties. However, the interface bonding strength of Mg/Cu is low. In this study, we examined the effect of hot-dip tin coating (HDTC) with copper (Cu) on the interfacial metallurgical bonds between AZ91D Magnesium (Mg) alloy and Cu composite casting. A transition layer composed of Mg2Cu and MgCu2 intermetallic compounds (IMCs) formed at the interface of the AZ91D/HDTC-Cu composite casting. However, the transition layer was about 1 μm at the AZ91D/Cu interface, mainly comprising Mg(Al, Cu)2 IMC. Both the AZ91D/Cu and AZ91D/HDTC-Cu interfaces exhibited many labyrinthine Mg(Al, Cu)2 IMCs and layer-like Mg2(Al, Cu) IMCs. Moreover, the interfacial shear strength of the AZ91D/Cu was changed from 12.6 MPa to 52.4 MPa due to the solid solution of Sn atom and the precipitation of Mg2Sn IMC at the interface after HDTC treatment. Meanwhile, the shear fracture surfaces are characterized by brittle fractures.
- 12 January 2024
- Published by Springer Nature in China Foundry
- Vol. 21 (2) , 159-167
Interfacial reaction between AZ91D magnesium alloy melt and mild steel under high temperature
- 12 January 2024
- Published by Springer Nature in China Foundry
- Vol. 21 (2) , 159-167
Interfacial reaction between AZ91D magnesium alloy melt and mild steel under high temperature
- Open Access
Effect of Q235 Hot-Dip Galvanized and Post-Casting T6 Heat Treatment on Microstructure and Mechanical Properties of Interfacial between AZ63 and Q235 by Solid-Liquid Compound Casting
AZ63 sacrificial anode is widely used to protect buried metal pipelines and reinforced concrete structures and so on. The interfacial metallurgical bonding between AZ63 sacrificial anode and Q235 wiring terminal directly affects its cathodic protection performance. Therefore, microstructure and mechanical properties of interfacial between AZ63 and Q235 by solid–liquid compound casting with hot-dip galvanized and post-casting solution-aging treatment (T6) were investigated. The results indicate that hot-dip galvanizing on the surface of Q235 is beneficial to the formation of intermetallic compounds at the interface. At the same time, it can promote the metallurgical bonding of the interface between AZ63 and Q235. After T6 heat treatment, the intermetallic compound at the interface between AZ63 and galvanized Q235 was refined. The electron-probe microanalyzer (EPMA) revealed that the intermetallic compounds at the interfaces between AZ63 and galvanized Q235 were Fe2Al5 before and after T6 treatment. Push-out testing and microhardness were used to investigate the mechanical properties of interface between AZ63 and Q235. It is shown that the hot-dip galvanization of the Q235 surface and T6 treatment were beneficial to improve the metallurgical bonding shear strength and microhardness of the interface. After T6 heat treatment, the highest shear strength at the interface between AZ63 and galvanized Q235 was up to 31.9 ± 1.9 MPa.
Open AccessEffect of Q235 Hot-Dip Galvanized and Post-Casting T6 Heat Treatment on Microstructure and Mechanical Properties of Interfacial between AZ63 and Q235 by Solid-Liquid Compound Casting
AZ63 sacrificial anode is widely used to protect buried metal pipelines and reinforced concrete structures and so on. The interfacial metallurgical bonding between AZ63 sacrificial anode and Q235 wiring terminal directly affects its cathodic protection performance. Therefore, microstructure and mechanical properties of interfacial between AZ63 and Q235 by solid–liquid compound casting with hot-dip galvanized and post-casting solution-aging treatment (T6) were investigated. The results indicate that hot-dip galvanizing on the surface of Q235 is beneficial to the formation of intermetallic compounds at the interface. At the same time, it can promote the metallurgical bonding of the interface between AZ63 and Q235. After T6 heat treatment, the intermetallic compound at the interface between AZ63 and galvanized Q235 was refined. The electron-probe microanalyzer (EPMA) revealed that the intermetallic compounds at the interfaces between AZ63 and galvanized Q235 were Fe2Al5 before and after T6 treatment. Push-out testing and microhardness were used to investigate the mechanical properties of interface between AZ63 and Q235. It is shown that the hot-dip galvanization of the Q235 surface and T6 treatment were beneficial to improve the metallurgical bonding shear strength and microhardness of the interface. After T6 heat treatment, the highest shear strength at the interface between AZ63 and galvanized Q235 was up to 31.9 ± 1.9 MPa.
- Open Access
Interfacial Reactions between Mg-40Al and Mg-30Y Master Alloys
Interfacial reactions between Mg-40Al and Mg-30Y master alloys were investigated at intervals of 25 °C in the 350–400 °C by using a diffusion couple method. Noticeable reaction layers were formed at the interfaces of the diffusion couples. The concentration profiles of the reaction layers were characterized. The diffusion path of the diffusion couple at 400 °C is constructed on the Mg-Al-Y ternary isothermal temperature phase diagram. The phases of the reaction layer were characterized by X-ray diffraction. The interfacial reaction thermodynamics of diffusion couples were studied. These results indicate that Al2Y is the only new formed intermetallic phase in the reaction layers. The growth constants of the reaction layers were calculated. In the reaction layer II, the integrated interdiffusion coefficients of Al are higher than Y, the diffusion activation energy of Y is higher than that of Al.
Open AccessInterfacial Reactions between Mg-40Al and Mg-30Y Master Alloys
Interfacial reactions between Mg-40Al and Mg-30Y master alloys were investigated at intervals of 25 °C in the 350–400 °C by using a diffusion couple method. Noticeable reaction layers were formed at the interfaces of the diffusion couples. The concentration profiles of the reaction layers were characterized. The diffusion path of the diffusion couple at 400 °C is constructed on the Mg-Al-Y ternary isothermal temperature phase diagram. The phases of the reaction layer were characterized by X-ray diffraction. The interfacial reaction thermodynamics of diffusion couples were studied. These results indicate that Al2Y is the only new formed intermetallic phase in the reaction layers. The growth constants of the reaction layers were calculated. In the reaction layer II, the integrated interdiffusion coefficients of Al are higher than Y, the diffusion activation energy of Y is higher than that of Al.