Correlating Rate‐Dependent Transition Metal Dissolution between Structure Degradation in Li‐Rich Layered Oxides
Authors:
Abstract
Understanding the mechanism of the rate‐dependent electrochemical performance degradation in cathodes is crucial to developing fast charging/discharging cathodes for Li‐ion batteries. Here, taking Li‐rich layered oxide Li1.2Ni0.13Co0.13Mn0.54O2 as the model cathode, the mechanisms of performance degradation at low and high rates are comparatively investigated from two aspects, the transition metal (TM) dissolution and the structure change. Quantitative analyses combining spatial‐resolved synchrotron X‐ray fluorescence (XRF) imaging, synchrotron X–ray diffraction (XRD) and transmission electron microscopy (TEM) techniques reveal that low‐rate cycling leads to gradient TM dissolution and severe bulk structure degradation within the individual secondary particles, and especially the latter causes lots of microcracks within secondary particles, and becomes the main reason for the fast capacity and voltage decay. In contrast, high‐rate cycling leads to more TM dissolution than low‐rate cycling, which concentrates at the particle surface and directly induces the more severe surface structure degradation to the electrochemically inactive rock‐salt phase, eventually causing a faster capacity and voltage decay than low‐rate cycling. These findings highlight the protection of the surface structure for developing fast charging/discharging cathodes for Li‐ion batteries.Keywords
Funding Information
- National Natural Science Foundation of China (52172175)
This publication has 48 references indexed in Scilit:
- Unusual Stability of Acetonitrile-Based Superconcentrated Electrolytes for Fast-Charging Lithium-Ion BatteriesJournal of the American Chemical Society, 2014
- Binder‐Free LiCoO2/Carbon Nanotube Cathodes for High‐Performance Lithium Ion BatteriesAdvanced Materials, 2012
- Re-Deposition of Manganese Species on Spinel LiMn2O4Electrode after Mn DissolutionJournal of the Electrochemical Society, 2012
- Extremely Durable High‐Rate Capability of a LiNi0.4Mn0.4Co0.2O2 Cathode Enabled with Single‐Walled Carbon NanotubesAdvanced Energy Materials, 2010
- A new approach to improve the high-voltage cyclic performance of Li-rich layered cathode material by electrochemical pre-treatmentJournal of Power Sources, 2008
- Molten Salt Synthesis and High Rate Performance of the “Desert‐Rose” form of LiCoO2Advanced Materials, 2008
- Mechanisms of manganese spinels dissolution and capacity fade at high temperatureJournal of Power Sources, 2001
- Optimized LiFePO[sub 4] for Lithium Battery CathodesJournal of the Electrochemical Society, 2001
- Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteriesSolid State Ionics, 1996
- Preparation of a new crystal form of manganese dioxide: λ-MnO2Journal of Solid State Chemistry, 1981