Numerical Modeling of Two-Phase Flow inside a Wet Flue Gas Absorber Sump
Open Access
Abstract
A numerical model of a flue gas scrubber sump is developed with the aim of enabling optimization of the design of the sump in order to reduce energy consumption. In this model, the multiphase flow of the continuous phase, i.e., water, and the dispersed phase, i.e., air bubbles, is considered. The air that is blown in front of the agitators, as well as the influence of the flow field of the agitators on the distribution of the dispersed phase and the recirculation pumps as outlet, is modeled. The bubble Sauter mean diameter is modeled using the population balance model. The model is used to analyze operating parameters such as the bubble retention time, the average air volume fraction, bubble Sauter mean diameter, the local distribution of the bubble size and the amount of air escaping from the pump outlets at two operating points. The purpose of the model is to simulate the two-phase flow in the sump of the flue gas scrubber using air dispersion technology with a combination of spargers and agitators, which, when optimized, reduces energy consumption by 33%. The results show that the homogeneity of air is lower in the bottom part of the absorber sump and that the amount of air escaping through recirculation pipes equals 1.2% of the total air blown into the absorber sump. The escaping air consists mainly of bubbles smaller than 6 mm. Additional operating point results show that halving the magnitude of the linear momentum source lowers the air retention, as well as the average homogeneity of the dispersed air.Keywords
Funding Information
- Slovenian Research and Innovation Agency (ARIS) (P2-0196)
This publication has 27 references indexed in Scilit:
- Development and implementation of a polydispersed multiphase flow model in OpenFOAMComputers & Chemical Engineering, 2011
- Simulation of the operation of an industrial wet flue gas desulfurization systemFuel Processing Technology, 2010
- Multiphase Euler–Lagrange CFD simulation applied to Wet Flue Gas Desulphurisation technologyInternational Journal of Multiphase Flow, 2009
- Detailed modelling of a flue-gas desulfurisation plantComputers & Chemical Engineering, 2007
- Flue gas desulfurization gypsum: Study of basic mechanical, hydric and thermal propertiesConstruction and Building Materials, 2007
- Transverse migration of single bubbles in simple shear flowsChemical Engineering Science, 2002
- A tensorial approach to computational continuum mechanics using object-oriented techniquesComputers in Physics, 1998
- Analysis of phase distribution in fully developed laminar bubbly two-phase flowInternational Journal of Multiphase Flow, 1991
- Momentum and heat transfer in two-phase bubble flow—I. TheoryInternational Journal of Multiphase Flow, 1981
- The numerical computation of turbulent flowsComputer Methods in Applied Mechanics and Engineering, 1974