AEGD-Assisted Plasma Nitriding of AISI M2 Steel: Influence of Treatment Time on Structure and Scratch Resistance
Authors:
- Sebastián Martínez GarcíaSGSebastián Martínez García
- Leonardo Bohórquez SantiagoLSLeonardo Bohórquez Santiago
- Alexander RudenARAlexander Ruden
- Julián Felipe Villada CastilloJulián Felipe Villada Castillo
- Abel Hurtado-MacíasAHAbel Hurtado-Macías
- Guillermo César Mondragón-RodríguezGMGuillermo César Mondragón-Rodríguez
- Jhon Alexander Villada-VillalobosJVJhon Alexander Villada-Villalobos
- Juan Manuel González-CarmonaJuan Manuel González-Carmona
Open Access
- 28 April 2026
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (5) , 150
Abstract
The effect of treatment time on arc-enhanced glow discharge plasma-assisted nitriding (AEGD-PAN) of AISI M2 high-speed steel was investigated for non-heat-treated and heat-treated substrates. Nitriding treatments were carried out at 350 °C for 1.5 and 3.5 h, producing diffusion layers with thicknesses ranging from approximately 38 to 75 µm without formation of a continuous brittle compound layer. X-ray diffraction combined with Rietveld refinement revealed the progressive formation of γ′-Fe4N and ε-Fe23N nitrides together with lattice expansion of the α-Fe matrix, indicating nitrogen supersaturation and precipitation strengthening within the diffusion zone. Heat-treated specimens exhibited higher surface hardness, reaching ~1350 HV0.1, while non-heat-treated substrates developed pronounced hardness gradients associated with diffusion-controlled layer growth. Scratch testing showed improved resistance to contact-induced damage with increasing nitriding time, particularly for the 3.5 h treatment, where lateral cracking was significantly reduced and load-bearing capacity increased. Multi-pass scratch wear tests revealed a reduction in the Archard wear coefficient by up to four orders of magnitude compared with untreated M2 steel. These results demonstrate that AEGD-PAN at moderate temperature enables efficient diffusion layer formation and significant improvement in the tribological performance of high-alloy tool steels.Keywords
Funding Information
- SECIHTI (1077-02-2015)
- SECIHTI (297265)
- SECIHTI (296384)
- Centro de Ingeniería y Desarrollo Industrial (QD057)
- Centro de Ingeniería y Desarrollo Industrial (QV0072)
- Universidad Tecnológica de Pereira (3-25-8)
This publication has 59 references indexed in Scilit:
- Microstructural and Mechanical Characterisation of Quenched, Quenched and Tempered AISI M2 High-Speed Steel Subjected to Deep Cryogenic TreatmentMetallurgical and Materials Transactions A, 2024
- Alloying Element Nitride Development in Ferritic Fe-Based Materials Upon Nitriding: A ReviewJournal of Materials Engineering and Performance, 2016
- Effect of Cryogenic Treatment on AISI M2 High Speed Steel: Metallurgical and Mechanical CharacterizationJournal of Materials Engineering and Performance, 2011
- A diffusion model of metal surface modification during plasma nitridingApplied Physics A, 1996
- Nitride width and microhardness in H-12 ion nitrided steelMaterials Letters, 1992
- Some effects of the plasma nitriding process on layer propertiesThin Solid Films, 1992
- Adhesion testing by the scratch test method: The influence of intrinsic and extrinsic parameters on the critical loadThin Solid Films, 1987
- Analysis of the abrasive wear mechanism by successive observations of wear processes in a scanning electron microscopeWear, 1986
- On the chemistry and stability of complex carbides and nitrides in microalloyed steelsActa Metallurgica, 1985
- Nitriding of AISI M2 tool steel in an inductive r.f. plasmaThin Solid Films, 1983