Evaluation of Active Heat Sinks Design under Forced Convection—Effect of Geometric and Boundary Parameters
Open Access
Abstract
This study shows the performance of heat sinks (HS) with different designs under forced convection, varying geometric and boundary parameters, via computational fluid dynamics simulations. Initially, a complete and detailed analysis of the thermal performance of various conventional HS designs was taken. Afterwards, HS designs were modified following some additive manufacturing approaches. The HS performance was compared by measuring their temperatures and pressure drop after 15 s. Smaller diameters/thicknesses and larger fins/pins spacing provided better results. For fins HS, the use of radial fins, with an inverted trapezoidal shape and with larger holes was advantageous. Regarding pins HS, the best option contemplated circular pins in combination with frontal holes in their structure. Additionally, lattice HS, only possible to be produced by additive manufacturing, was also studied. Lower temperatures were obtained with a hexagon unit cell. Lastly, a comparison between the best HS in each category showed a lower thermal resistance for lattice HS. Despite the increase of at least 38% in pressure drop, a consequence of its frontal area, the temperature was 26% and 56% lower when compared to conventional pins and fins HS, respectively, and 9% and 28% lower when compared to the best pins and best fins of this study.Keywords
This publication has 61 references indexed in Scilit:
- Net Shape Fins for Compact Heat Exchanger Produced by Cold SprayJournal of Thermal Spray Technology, 2013
- Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser MeltingInternational Journal of Heat and Mass Transfer, 2009
- Optimization of Pin-Fin Heat Sinks in Bypass Flow Using Entropy Generation Minimization MethodJournal of Electronic Packaging, 2008
- A comparative study of the airside performance of heat sinks having pin fin configurationsInternational Journal of Heat and Mass Transfer, 2007
- Selective laser melting of heat transfer devicesRapid Prototyping Journal, 2007
- Selection and optimization of pin cross-sections for electronics coolingApplied Thermal Engineering, 2007
- The Role of Fin Geometry in Heat Sink PerformanceJournal of Electronic Packaging, 2006
- Forced convective heat transfer across a pin fin micro heat sinkInternational Journal of Heat and Mass Transfer, 2005
- Optimal and Manufacturable Two-dimensional, Kagomé-like Cellular SolidsJournal of Materials Research, 2002
- On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacityInternational Journal of Heat and Mass Transfer, 2001