The influence of thickness and recycled milled glass fiber fillers on the delamination resistance of polymer composite angle brackets
- 7 December 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (4) , 3067-3080
Abstract
Composite structures with L, C, and T shape geometries are commonly used in the design of aerospace structural components. These complex structures are prone to delamination failure at the curved region. This study investigates the effect of thickness and recycled milled glass fiber fillers to improve the strength properties and delamination resistance of glass/epoxy composite angle brackets. Different thicknesses of 3.5 mm (16 layers), 5 mm (24 layers), and 6.5 mm (32 layers) specimens were subjected to four‐point bending test with acoustic emission (AE) monitoring for evaluating damage resistance. Mechanical results reveal that the specimen with a higher thickness of 6.5 mm has better damage tolerance, followed by 3.5 and 5 mm angle brackets. Moreover, the location of AE signals and % of AE hits noticed the initiation and propagation of delamination in 5 mm thickness specimen at the earlier stage of loading. However, the curved beam strength and interlaminar tensile strength (ILTS) of 5 mm thickness specimen were improved by 31.02% and 19.2% respectively, through the incorporation of 2 wt% of fillers. Further, the interfacial adhesion between the fillers and epoxy matrix was studied using Fourier‐transform infrared analysis to confirm the improvement of delamination resistance in 5 mm thickness specimen. Finally, the mechanical and AE results were well correlated with field emission scanning electron microscope images to characterize the damage mechanisms in composite angle brackets.Highlights: Effect of thickness on the delamination resistance of composites was studied. Interlaminar properties of composite angle brackets were assessed. Acoustic emission parameters were used to study the damage mechanisms. Recycled milled glass fillers were employed to improve delamination resistance. Mechanical and acoustic emission results were correlated with field emission scanning electron microscope images.Keywords
This publication has 39 references indexed in Scilit:
- In-plane strength enhancement of laminated composites via aligned carbon nanotube interlaminar reinforcementComposites Science and Technology, 2016
- Effect of patch hybridization on the compression behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoringPolymer Composites, 2016
- Determination of the out-of-plane tensile strength using four-point bending tests on laminated L-angle specimens with different stacking sequences and total thicknessesComposites Part A: Applied Science and Manufacturing, 2016
- Low cycle fatigue of CFRP laminated composites due to repeated out-of-plane loadingProcedia Structural Integrity, 2016
- Residual strength estimation of CFRP laminates subjected to impact at different velocities and temperaturesPolymer Composites, 2015
- Damage evaluation of composite materials using acoustic emission features and Hilbert transformJournal of Composite Materials, 2015
- Effects of defects on interlaminar tensile fatigue behavior of carbon/epoxy compositesComposites Science and Technology, 2013
- Experimental investigation on deformation and strength of carbon/epoxy laminated curved beamsPolymer Testing, 2012
- Strength of composite angle brackets with multiple geometries and nanofiber-enhanced resinsJournal of Composite Materials, 2010
- Interpretation of Infrared Spectra, A Practical Approach2000