Global analysis of tungsten migration in WEST discharges using numerical modelling
Open Access
- 15 October 2024
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (12) , 126049
Abstract
Plasma discharges in the tungsten (W) Environment Steady-state Tokamak (WEST) are strongly impacted by W contamination. In WEST experiments, due to W contamination, the power radiated in the plasma (P Rad) is on average, around 50% of the total power injected into the plasma (P TOT). Furthermore, this radiated power fraction (f Rad) is almost insensitive to plasma conditions. The causes behind this experimental trend are not fully understood. In this contribution, a 3D numerical model is used to analyze the W migration in the WEST boundary plasma in different plasma scenarios. The WEST experimental database is sampled to obtain a scan of simulation input parameters. These parameters mimic the WEST plasma conditions over a chosen experimental campaign. The simulation results are compared to WEST diagnostics measurements (reflectometry, Langmuir probes, and visible spectroscopy) to verify that the simulated plasma conditions are representative of the WEST database. The W contamination trend is analyzed: the W density (n W) strongly decreases when the radial distance between the separatrix and WEST antennas (Radial Outer Gap, ROG) increases. On the other hand, at a given ROG, n W increases proportionally with the power entering the scrape-off layer (P SOL). P Rad is estimated with a simple 0D model. For a fixed ROG, f Rad is not sensitive to plasma conditions. These trends are qualitatively and, at times, quantitatively comparable to what is observed in WEST experiments: the simulated trends are related to the poorly screened W influx caused by the erosion of the main chamber Plasma-Facing Components. Thus, this numerical analysis suggests a possible interpretation of WEST experimental trends.Keywords
Funding Information
- EUROfusion (101052200)
This publication has 23 references indexed in Scilit:
- First 3D modelling of tungsten erosion and migration in WEST discharges adopting a toroidally non-symmetric wall geometryNuclear Materials and Energy, 2022
- OEDGE modeling of far-SOL tungsten impurity sources and screening in WESTNuclear Materials and Energy, 2022
- An overview of the numerical methods for tokamak plasma equilibrium computation implemented in the NICE codeFusion Engineering and Design, 2020
- Renewal of the interfero-polarimeter diagnostic for WESTFusion Engineering and Design, 2019
- Beryllium global erosion and deposition at JET-ILW simulated with ERO2.0Nuclear Materials and Energy, 2019
- Three-dimensional modelling of edge multi-component plasma taking into account realistic wall geometryNuclear Materials and Energy, 2019
- ERO modelling of tungsten erosion in the linear plasma device PSI-2Nuclear Materials and Energy, 2017
- Assessment of fluid neutral models for a detached ITER caseNuclear Materials and Energy, 2017
- Tungsten transport and sources control in JET ITER-like wall H-mode plasmasJournal of Nuclear Materials, 2015
- Evidence for a poloidally localized enhancement of radial transport in the scrape-off layer of the Tore Supra tokamakJournal of Nuclear Materials, 2007