Experimental study on the tribo-chemical smoothening process between self-mated silicon carbide in a water-lubricated surface-contact reciprocating test
Open Access
- 5 December 2018
- journal article
- research article
- Published by Tsinghua University Press in Friction
- Vol. 7 (2) , 181-191
Abstract
Silicon carbide (SiC) can be tribo-chemically smoothened during a self-mated sliding procedure in the aqueous environment. As well reported in the point-contact tests, this smoothening process works well due to the abundant water as oxidant. After this smoothening process, the tribo-surface is well polished, a closely mated tribo-gap naturally forms, and an ultra-low friction state is built. However, water in the tribo-gap could be insufficient in industrial applications, e.g., the seal gap in mechanical seals. In this study, the tribo-chemical smoothening behavior in such environment was researched. A surface-contact reciprocating test was used to simulate the aqueous environment where water was insufficient. After tests, compared to the published results from the point-contact tests, the same ultra-low friction state was achieved. A part of the tribo-surface was tribo-chemically smoothened. The obtained smoothened surface microstructure was consistent with the published information. Meanwhile, severe abrasive wear occurred. A porous oxygen-rich layer was found existing beneath the abrasion-induced grooves, in which numerous smashed wear debris adhered on the worn surfaces. We concluded that the shortage of water initiated the severe abrasion, meanwhile the generated wear debris aggravated the wear condition. This understanding is instructive for developing new methods to avoid the severe abrasion in the same water insufficient environment.Keywords
This publication has 27 references indexed in Scilit:
- Influence of electric potentials on the tribological behaviour of silicon carbideWear, 2011
- Lubrication of Silicon Nitride and Silicon Carbide by Water: Running in, Wear and Operation of Sliding BearingsTribology Letters, 2004
- Tribochemistry Between Water and Si3N4 and SiC: Induction Time AnalysisTribology Letters, 2004
- Micro- and macro-tribological properties of SiC ceramics in sliding contactWear, 2001
- Friction and wear of self-mated SiC and Si3N4 sliding in waterWear, 2001
- The Difference in Running-In Period and Friction Coefficient Between Self-Mated Si3N4 and SiC Under Water LubricationTribology Letters, 2001
- Formation of tribochemical layer of ceramics sliding in water and its role for low frictionWear, 2000
- Influence of topography on the running-in of water-lubricated silicon carbide journal bearingsWear, 1996
- Tribological Characteristics of SiC Ceramics in High‐Temperature and High‐Pressure WaterJournal of the American Ceramic Society, 1994
- Friction and Wear of Silicon Nitride and Silicon Carbide in Water: Hydrodynamic Lubrication at Low Sliding Speed Obtained by Tribochemical WearA S L E Transactions, 1987