Influence of top‐section design and draft‐tube height on the performance of airlift bioreactors containing water‐in‐oil microemulsion
- 17 February 2004
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 79 (3) , 260-267
Abstract
The mixing and mass transfer characteristics of draft‐tube airlift bioreactors (DTAB) for a water‐in‐kerosene microemulsion, as a cold model of petroleum biodesulfurization, were studied. Incomplete gas disengagement at the top‐section of the DTAB and hence high gas recirculation were obtained with the microemulsion system for all the top‐section configurations employed in the present study especially at the high airflow rates. The ratio (S) of the volumes of the riser and the downcomer to the top‐section together with the gas disengagement abilities of the gas separator were both found to affect the mixing performance of the DTAB employed for the microemulsion system. Increase in the draft‐tube height resulted in significant increase in the mixing time (tm) and a slight increase in the overall volumetric oxygen transfer coefficient (kLa). Increase in the diameter of the top‐section and the height of the liquid above the draft‐tube led to a decrease in kLa, the latter effect being less prominent. New correlations were developed that predicted the mixing time and oxygen transfer coefficients obtained in the present work with reasonable accuracy. Copyright © 2004 Society of Chemical IndustryKeywords
This publication has 25 references indexed in Scilit:
- Pneumatically Agitated Bioreactors in Industrial and Environmental Bioprocessing: Hydrodynamics, Hydraulics, and Transport PhenomenaApplied Mechanics Reviews, 1998
- Biodesulphurisation of Dibenzothiophene in Hydrophobic Media byRhodococcus sp. Strain IGTS8Journal of Chemical Technology & Biotechnology, 1997
- Influence of the gas—liquid separator design on hydrodynamic and mass transfer performance of split‐channel airlift reactorsJournal of Chemical Technology & Biotechnology, 1995
- PREDICTION OF MIXING TIME IN AIRLIFT REACTORSChemical Engineering Communications, 1995
- The influence of vessel height and top‐section size on the hydrodynamic characteristics of airlift fermentorsBiotechnology and Bioengineering, 1994
- Circulation liquid velocity, gas holdup and volumetric oxygen transfer coefficient in external‐loop airlift reactorsJournal of Chemical Technology & Biotechnology, 1993
- Mass transfer phenomena in an airlift reactor: Effects of solids loading and temperatureBiotechnology and Bioengineering, 1990
- Sulfur removal from coal through multiphase media containing biocatalystsJournal of Chemical Technology & Biotechnology, 1990
- Relationship between the volumetric mass transfer coefficient and gas holdup in airlift fermentorsBiotechnology and Bioengineering, 1986
- Gas holdup and volumetric liquid-phase mass transfer coefficient in solid-suspended bubble column with draught tube.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1985