Blade trailing edge optimization for diffuser centrifugal pumps in marine applications: Enhancing energy efficiency and suppressing rotor-stator interaction toward low-carbon marine pumping systems
Authors:
- Hui LiHLHui Li
- Yuyang GuoYGYuyang Guo
- Yong HanYHYong Han
- Jia-Xing LuJLJia-Xing Lu
- Junhui ZhangJZJunhui Zhang
- Yang YangYang Yang
- Weidong ShiWSWeidong Shi
- Ling ZhouLZLing Zhou
Preprint
- 5 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Centrifugal pumps are vital in offshore cooling, seawater lifting, ballasting and ocean energy conversion, but rotor-stator interaction (RSI) causes pressure pulsation, flow instability and energy loss. BTE geometry governs pressure wave propagation in the impeller-diffuser gap, yet its attenuation mechanism for marine pumps is unclear. We propose two BTE designs: M1 (fourth-order Bézier thin edge) and M2 (30 mm fillet), with original as M0. Hybrid experiments, CFD and spectrum analysis compare the three. Results show M1 and M2 shrink outlet low-pressure zones, mitigate blade-sweeping pressure drop, and improve circumferential uniformity. M1 and M2 reduce diffuser-inlet pulsation amplitude by 40–50% and 25–35%, respectively. Maximum static pressure difference per passage falls from 0.51×10⁵ (M0) to 0.28×10⁵ (M1) and 0.35×10⁵ (M2). M1 offers best suppression; M2 improves efficiency and head at low flow, balancing stability and efficiency. Optimized BTE geometries boost efficiency by 0.9–1.2 percentage points. For a 15 kW pump at 5000 h/year, M2 saves 900–1200 kWh and cuts CO₂ by 450–600 kg/year. Remodeling BTE stabilizes pressure waves, providing guidelines and a low-carbon foundation.Keywords
This publication has 14 references indexed in Scilit:
- Quantitative stability analysis of complex nonlinear hydraulic turbine regulation system based on accurate calculationApplied Energy, 2023
- Effects of cutting the blade on the performance and pressure pulsation of a centrifugal pumpEnergy Science & Engineering, 2020
- Investigation on reversible pump turbine flow structures and associated pressure field characteristics under different guide vane openingsScience China Technological Sciences, 2019
- Experimental study on the vibrational performance and its physical origins of a prototype reversible pump turbine in the pumped hydro energy storage power stationRenewable Energy, 2019
- Energy Loss Analysis of Novel Self-Priming Pump Based on the Entropy Production TheoryJournal of Thermal Science, 2018
- Determination of epsilon for Omega vortex identification methodJournal of Hydrodynamics, 2018
- A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping systemApplied Energy, 2016
- Effects of viscosity on turbine mode performance and flow of a low specific speed centrifugal pumpApplied Mathematical Modelling, 2016
- Review of the shear-stress transport turbulence model experience from an industrial perspectiveInternational Journal of Computational Fluid Dynamics, 2009
- Time–frequency characterization of the unsteady phenomena in a centrifugal pumpInternational Journal of Heat and Fluid Flow, 2008