Glass Foam from Flat Glass Waste Produced by the Microwave Irradiation Technique
Open Access
- 30 March 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (4) , 550
Abstract
A glass foam with good thermal insulation characteristics (apparent density of 0.38 g/cm3, porosity of 81.9% and thermal conductivity of 0.089 W/m·K), high compressive strength (3.9 MPa) and a satisfactory microstructural homogeneity with pore size between 0.6–1.0 mm was obtained by sintering at 927 °C of flat glass waste, a glass waste usually not used in the manufacture of glass foam. The manufacturing recipe has been improved by the simultaneous use of two microwave susceptible foaming agents (SiC and Si3N4) and the addition of coal fly ash and an oxygen-supplying agent (MnO2). The originality of the work was the simultaneous use of the two foaming agents and also the application of the technique of predominantly direct microwave heating, compared to the conventional heating methods commonly used in the manufacture of glass foam. The remarkable energy efficiency of the microwave heating technique led to high average heating rates without affecting the structural homogeneity and very low specific energy consumption.Keywords
This publication has 14 references indexed in Scilit:
- COMPARATIVE ANALYSIS OF THE FOAM GLASS GRAVEL TYPES EXPERIMENTALLY PRODUCED BY MICROWAVE IRRADIATIONJournal of Engineering Studies and Research, 2020
- Biomass Gasification, Pyrolysis and Torrefaction2018
- Characterization and Analysis of Porosity and Pore StructuresReviews in Mineralogy and Geochemistry, 2015
- Modern Microwave Methods in Solid-State Inorganic Materials Chemistry: From Fundamentals to ManufacturingChemical Reviews, 2013
- Review: The Use of Microwave Irradiation in the Processing of Glasses and Their CompositesIndustrial & Engineering Chemistry Research, 2010
- Microwave heating processes involving carbon materialsFuel Processing Technology, 2010
- Foaming of flat glass cullet using Si3N4 and MnO2 powdersCeramics International, 2009
- Glass ceramic foams from coal ash and waste glass: production and characterisationAdvances in Applied Ceramics: Structural, Functional and Bioceramics, 2006
- Microwave heating applications in environmental engineering—a reviewResources, Conservation and Recycling, 2002
- Study on Thermal Decomposition of MnO2 and Mn2O3 by Thermal AnalysisTransactions of the Japan Institute of Metals, 1983