LPLucian Paunescu

Lucian Paunescu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lucian Paunescu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efficiency of Applying Management Principles in Education

    by Ionela Luminița Cănuță (Bucuroiu), Adrian Ioana, Augustin Semenescu, Lucian Paunescu

    Educational management contributes to increasing the performance of school institutions, but also to improving students’ results. The application of management principles significantly influences the quality of the educational process. This paper aims to investigate whether applied management principles influence students’ results. The literature emphasizes that school institutions that apply structured management achieve better academic performance. Studies also mention the importance of educational leadership as a success factor in increasing students’ academic results. The methodology of the study uses the quantitative analysis of the students’ results at three successive tests, using statistical analysis to determine the students’ progress, after applying the principles of management. The question underlying this research is: “Does the application of management principles influence educational outcomes?”. The results obtained in this research indicate that the application of management principles contributes to the increase of educational performance. The research was carried out at the level of the ninth grade and represents the empirical proof of the application of management principles in a real school context.

  • Open Access

    Ecological Education—Design and Implementation of Burners Operating with Biofuels in Oxy-Thermal Processes for Industrial Furnaces

    by Adrian Ioana, Lucian Paunescu, Nicolae Constantin, Augustin Semenescu, Ionela Luminita Canuta (Bucuroiu)

    The last decades have offered new challenges to researchers worldwide through the problems our planet is facing both in the environmental protection field and the need to replace fossil fuels with new environmentally friendly alternatives. Bioenergy, as a form of renewable energy, is an acceptable option from all points of view, and biofuels, due to their biological origin, have the ability to satisfy the new needs of humanity. As they release non-polluting combustion products into the atmosphere, biofuels have already been adopted as additives in traditional liquid fuels, intended mainly for the internal combustion engines of automobiles. The current work proposes an extension of the biofuel application in combustion processes specific to industrial furnaces. This technical concern has not been found in the literature, except for the achievements of the research team involved in this work, who performed the previous investigations. A 51.5 kW burner was designed to operate with glycerin originating from the triglycerides of plants and animals, mixed with ethanol, an alcohol produced by the chemical industry recently used as an additive in gasoline for automobile engines. Industrial oxygen was chosen as the oxidizing agent necessary for the liquid mixture combustion, allowing us to obtain much higher flame temperatures compared with the usual combustion processes using air. Mixing glycerin with ethanol in an 8.8 ratio allowed for growing flame stability, also accentuated by creating swirl currents in the flame through the speed regime of fluids at the exit from the burner body. Results were excellent in both the flame stability and low level of polluting emissions.


  • Open Access

    Optimal Correlation between Thermal Insulation Properties of Fly Ash-Based Porous Geopolymer and its Strength Level

    by Adrian Ioana, Lucian Paunescu, Augustin Semenescu, Ionela Luminita Canuta (Bucuroiu)

    The work was focused on the qualitative improvement of porous fly ash-based geopolymer properties, by reaching a better correlation between the thermal insulation and mechanical strength properties of this product intended for application in construction. The starting mixture for preparing the geopolymer included type F-coal fly ash as an alumina-silicate precursor, silica fume as a nanomaterial, olive oil as a surfactant as well as an alkaline activator solution composed of potassium hydroxide and sodium silicate. After hardening the geopolymer paste at 70 ℃ for 24 hours, the curing process was carried out at room temperature for 7 and 28 days, respectively. Results showed excellent heat insulation properties (apparent density between 475-518 kg·m-3 and heat conductivity between 0.107-0.129 W·m-1·K-1) as well as high compression strength between 6.89-7.42 MPa (after 28 days) and in the range of 4.71-5.18 MPa (after 7 days).

  • Open Access

    Ecological Education—Application of Biofuel Combustion in Oxy-Thermal Processes for Industrial Furnaces

    by Adrian Ioana, Lucian Paunescu, Nicolae Constantin, Augustin Semenescu, Ionela Luminita Canuta (Bucuroiu)

    The last decades have offered new challenges to researchers worldwide through the problems our planet is facing both in the environment protection field and the need to replace fossil fuels with new environmentally friendly alternatives. Bioenergy as a form of renewable energy is an acceptable option from all points of view and biofuels due to their biological origin have the ability to satisfy the new needs of humanity. By releasing some non-polluting combustion products into the atmosphere, biofuels have already been adopted as additives in traditional liquid fuels, being intended mainly for internal combustion engines of automobiles. The current work proposes an extension of biofuels application in combustion processes specific to industrial furnaces. This technical concern is not found in the literature, except for achievements of the research team involved in this work, which has performed previous investigations. A 51.5 kW-burner was designed to operate with glycerine originating from triglycerides of plants and animals, mixed with ethanol, an alcohol produced by the chemical industry recently used as an additive in gasoline for automobile engines. Industrial oxygen was chosen as the oxidizing agent necessary for the liquid mixture combustion, allowing to obtain much higher flame temperatures compared to the usual combustion processes using air. Mixing glycerine with ethanol in 8.8 ratio allowed growing flame stability, accentuated also by creating swirl currents in the flame through the speed regime of fluids at the exit from the burner body. Results were excellent both through the flame stability and low level of polluting emissions.

  • Open Access

    Biofuel Combustion in Oxy-Thermal Processes for Industrial Furnaces

    by Adrian Ioana, Lucian Paunescu, Eniko Volceanov, Nicolae Constantin, Ionela Luminita Canuta (Bucuroiu)

    The last decades have offered new challenges to researchers worldwide through the problems our planet is facing both in the environment protection field and the need to replace fossil fuels with new environmentally friendly alternatives. Bioenergy as a form of renewable energy is an acceptable option from all points of view and biofuels due to their biological origin have the ability to satisfy the new needs of humanity. By releasing some non-polluting combustion products into the atmosphere, biofuels have already been adopted as additives in traditional liquid fuels, being intended mainly for internal combustion engines of automobiles. The current work proposes an extension of biofuels application in combustion processes specific to industrial furnaces. This technical concern is not found in the literature, except for achievements of the research team involved in this work, which has performed previous investigations. A 51.5 kW-burner was designed to operate with glycerine originating from triglycerides of plants and animals, mixed with ethanol, an alcohol produced by the chemical industry recently used as an additive in gasoline for automobile engines. Industrial oxygen was chosen as the oxidizing agent necessary for the liquid mixture combustion, allowing to obtain much higher flame temperatures compared to the usual combustion processes using air. Mixing glycerine with ethanol in 8.8 ratio allowed growing flame stability, accentuated also by creating swirl currents in the flame through the speed regime of fluids at the exit from the burner body. Results were excellent both through the flame stability and low level of polluting emissions.

  • Open Access

    Possibilities of Physical-Chemical Sensors’ Use for Optimizing the Processing of Metallurgical Melting Based on Computer Systems

    by Adrian Ioana, Nicolae Constantin, Alexandra Istrate, Lucian Paunescu, Vili Pasare

    This article presents aspects regarding the possibilities of optimizing the quality of the elaboration of metallurgical melts by determining their physical-chemical properties. Thus, the article analyzes and presents methods for determining the viscosity and electrical conductivity related to metallurgical melts. Among the viscosity determination methods, two methods are presented, namely: the rotary viscometer method and the electro-vibratory viscometer method. Determining the electrical conductivity of a metallurgical melt is also of particular importance for ensuring the quality of the elaboration and refining of the melt. The article also presents the possibilities of using and implementing computer systems that ensure the accuracy of determining the physical-chemical properties of metallurgical melts, as well as examples of the use of physical-chemical sensors and specific computer systems for determining the analyzed parameters. The specific electrical conductivity measurements of oxide melts are performed by direct methods (by contact), with Ohm’s law as a starting point. Thus, the article presents the voltmeter-ammeter method and the point method (or the zero method). The novelty of this article is the description and the use of specific methods and sensors for certain determinations (viscosity and electrical conductivity) for metallurgical melts. The motivation here is the presentation of the authors’ research in the addressed field. The article presents an original contribution of the adaptation and use of some methods for determining some physico-chemical parameters, including specific sensors, in the field of the elaboration of metal alloys, with the aim of optimizing their quality.


  • Open Access

    High-Strength and Heat-Insulating Cellular Building Concrete Based on Calcined Gypsum

    by Adrian Ioana, Lucian Paunescu, Nicolae Constantin, Valeriu Rucai, Cristian Dobrescu, Vili Pasare, Alexandra Istrate

    A cellular concrete with a fine porous structure was experimentally made using the corrosion technique for aluminum powder as an expanding agent in an aqueous solution of Ca(OH)2. The originality of this paper was the use of our own production method for the fine aluminum powder through atomizing the recycled molten waste of this metal using concentrated jets of nitrogen. Additionally, the waste melting technique involved our own microwave heating method. A high weight proportion of calcined gypsum (maximum 82.3%) represented the main concrete binder. Using moderate contents of coal fly ash (3.6–11.1%) together with perlite (4.6–6.4%) to reduce the pore size and silica fume (0.3–1.2%) with pozzolanic properties, the aim was to obtain a macrostructure characterized by a very low pore size and to increase the compressive strength (by up to 4.1 MPa), despite the relatively low density (below 641 kg/m3). An industrial method of increasing the mechanical strength by steam curing fresh concrete was applied.


  • Open Access

    Glass Foam from Flat Glass Waste Produced by the Microwave Irradiation Technique

    by Adrian Ioana, Lucian Paunescu, Nicolae Constantin, Massimo Pollifroni, Dumitru Deonise, Florin Stefan Petcu

    A glass foam with good thermal insulation characteristics (apparent density of 0.38 g/cm3, porosity of 81.9% and thermal conductivity of 0.089 W/m·K), high compressive strength (3.9 MPa) and a satisfactory microstructural homogeneity with pore size between 0.6–1.0 mm was obtained by sintering at 927 °C of flat glass waste, a glass waste usually not used in the manufacture of glass foam. The manufacturing recipe has been improved by the simultaneous use of two microwave susceptible foaming agents (SiC and Si3N4) and the addition of coal fly ash and an oxygen-supplying agent (MnO2). The originality of the work was the simultaneous use of the two foaming agents and also the application of the technique of predominantly direct microwave heating, compared to the conventional heating methods commonly used in the manufacture of glass foam. The remarkable energy efficiency of the microwave heating technique led to high average heating rates without affecting the structural homogeneity and very low specific energy consumption.