Investigation of Drilling Performances, Tribological and Mechanical Behaviors of GFRC Filled with B4C and Gr
Open Access
- 31 July 2024
- journal article
- research article
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (12) , 9167-9184
Abstract
In this study, the effects of Gr and B4C filler materials on drilling performance, mechanical, and tribological behaviors of glass fiber-reinforced epoxy composites were experimentally investigated. Glass fiber-reinforced composite materials filled with B4C and Gr at different weight ratios (5%, 10%, and 15%) were manufactured using hand lay-up method. The produced composite materials underwent various tests, including mechanical tests (tensile and flexural tests), tribological tests (wear behavior), and drilling tests under different parameters. Additionally, SEM images of the worn and fractured surfaces were examined. The addition of both B4C and Gr fillers adversely affected the mechanical properties of glass fiber-reinforced composites. It was observed that tensile and flexural strengths decreased with increasing filler ratios. However, the addition of B4C and Gr fillers enhanced the wear resistance of glass fiber-reinforced composites. It was revealed that in drilling operations, as the feed rate increased, the thrust forces increased, while the cutting speed increased, the thrust forces decreased. It was determined that delamination values in glass fiber reinforced composites decreased as the feed rate increase, while delamination values increased as the cutting speed increased. Generally, the thrust forces, vibration, delamination, and moment values obtained during the drilling of B4C-filled glass fiber composites were found to be higher compared to Gr-filled glass fiber composites.Keywords
Funding Information
- Batman University
This publication has 58 references indexed in Scilit:
- Experimental Study of Polyester/Fiberglass/Stainless Steel Fiber Metal Laminates Mechanical PropertiesArabian Journal for Science and Engineering, 2024
- Tribological and mechanical properties of nanofilled glass fiber reinforced composites and analyzing the tribological behavior using artificial neural networksPolymer Composites, 2024
- Improving the wear behavior of epoxy resin with boron carbide reinforcementIranian Polymer Journal, 2021
- Comparative study of the influence of graphene nanoplatelets filler on the mechanical and tribological behavior of glass fabric‐reinforced epoxy compositesPolymer Composites, 2020
- The coupling effect and damage analysis when drilling GFRP laminates using candlestick drillsThe International Journal of Advanced Manufacturing Technology, 2019
- Investigation into Effect of Ceramic Fillers on Mechanical and Tribological Properties of Bamboo-Glass Hybrid Fiber Reinforced Polymer CompositesSilicon, 2017
- Analysis of thrust force and delamination in drilling GFRP composites with candle stick drillsThe International Journal of Advanced Manufacturing Technology, 2017
- Effect of Aluminum Filler on Friction and Wear Characteristics of Glass Epoxy CompositesSilicon, 2017
- Influence of different cooling methods on drill temperature in drilling GFRPThe International Journal of Advanced Manufacturing Technology, 2014
- Role of fillers on three‐body abrasive wear behavior of glass fabric reinforced epoxy compositesPolymer Composites, 2008