Study of the Microstructure Characterization and In Situ Observation of Crack Propagation in TC4/Al3Ti Metal–Intermetallic Laminated Composites
Open Access
Abstract
TC4/Al3Ti metal–intermetallic laminated (MIL) composites were fabricated by the vacuum hot-pressing process at 650 °C. The microstructure characteristics, i.e., grain boundary distribution, crystallographic orientation and Kernel Average Misorientation (KAM) map, were analyzed using EBSD. Meanwhile, the distribution of local strain and the fracture behavior of TC4/Al3Ti MIL composites during tensile process were determined by Digital Image Correlation (DIC) and in situ tensile experiments, respectively. Results show that the TC4/Al3Ti interfaces are well bonded and exhibit a distinct wavy morphology. The obvious Kirkendall pores and centerline are observed within the central region of the Al3Ti layer. The texture components of (10-10) and (11-20) are predominant in the TC4 layers; (100) and (110) are observed in the Al3Ti layer. Additionally, the average geometrically necessary dislocation (GNDs) density is 2.53 × 1014 m−2 in the TC4 layer, whereas it is 1.74 × 1014 m−2 in the Al3Ti layer. In the tensile test, the fracture resistance of TC4/Al3Ti MIL composites is significantly improved by the plastic deformation of the TC4 layers and the suppression of crack-tip instability. It is found that the extrinsic toughening mechanisms contain crack deflection, crack blunting, crack bridging, multiple cracking modes, and the plastic deformation of ductile TC4 layers in TC4/Al3Ti MIL composites. The real-time observation technique may provide more complete insights into the relationship between fracture behavior and enhanced toughness.Keywords
Funding Information
- Ningbo Yongjiang Talent Project
- State Key Laboratory of Advanced Metals and Materials (2021A-035-G)
- State Key Laboratory of Advanced Metals and Materials (2022072412)
- State Key Laboratory of Advanced Metals and Materials (2023ZD02)
- Ningbo city and Chinese ministry of education
This publication has 37 references indexed in Scilit:
- A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructureJournal of Materials Science & Technology, 2022
- In-situ investigation of crack initiation and propagation in roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites during tensile testJournal of Alloys and Compounds, 2020
- Enhanced tensile strength and fracture toughness of a Ti-TiAl metal-intermetallic laminate (MIL) compositeIntermetallics, 2020
- Role of layered structure in ductility improvement of layered Ti-Al metal compositeActa Materialia, 2018
- Fracture behavior and strain evolution of laminated compositesComposite Structures, 2017
- Bending behaviors and fracture characteristics of laminatedductile-tough composites under different modesComposites Science and Technology, 2016
- On the kinetics of TiAl3 intermetallic layer formation in the titanium and aluminum diffusion coupleIntermetallics, 2013
- Bioinspired Design Criteria for Damage‐Resistant Materials with Periodically Varying MicrostructureAdvanced Functional Materials, 2011
- Effect of interfacial bonding strength on tensile ductility of multilayered steel compositesComposites Science and Technology, 2009
- Effects of ductile laminate thickness, volume fraction, and orientation on fatigue-crack propagation in Ti-Al3Ti metal-intermetallic laminate compositesMetallurgical and Materials Transactions A, 2005