Characterization, Physicomechanical and Corrosion Properties of Reinforced Microcrystalline Cellulose Treated Silane Unsaturated Polyester Primer Coatings.
Authors:
- Zuliahani AhmadZAZuliahani Ahmad
- Nur Dina Adlina AzmaniNANur Dina Adlina Azmani
- Angelene Betsy MuraAMAngelene Betsy Mura
- Siti Hana Humaira RustamSRSiti Hana Humaira Rustam
- Muhamed Syaheen AzharMAMuhamed Syaheen Azhar
Open Access
- 27 February 2025
- journal article
- Published by UiTM Press, Universiti Teknologi MARA in Scientific Research Journal
- Vol. 22 (1) , 67-81
Abstract
Corrosion has been a major universal issue due to failure of building structures and high maintenance. The utilization of unsaturated polyester (UPE) as primer coating is insufficient to inhibit the corrosion. Hence, microcrystalline cellulose (MCC) had been incorporated into UPE as a reinforcement filler for the production of primer coatings, due to its high crystalline region in the structure. The objectives of this study were to investigate the physical, mechanical, and corrosive properties of various MCC loadings (0, 3, 6, 9, 12 and 15 wt%) reinforced UPE applied on metal substrates and determine the effect of silane treatment (MCC-APTES) on MCC reinforcement used in UPE-MCC coating for primer application. The coating properties were studied for adhesion, mechanical and corrosive properties using pencil hardness, adhesion tape and immersion tests. At 6% MCC-APTES loading showed improvement in mechanical and adhesion properties at 6H grade and less than 5 % pull out test for pencil hardness and adhesion tests respectively. Whilst the immersion test demonstrated that at 6% MCC-APTES of loading gives optimum corrosion resistant where no corrosion found as compared to the control sample as supported by the improved interaction shown in FTIR spectrum. Therefore, it was evidenced that at 6% of MCC-APTES has significant potential as a reinforcement filler and promotes enhanced mechanical, adhesion, and corrosion properties as compared to other formulations.Keywords
This publication has 18 references indexed in Scilit:
- Dispersion stability, adhesion strength, and anti-corrosion properties of water-born polyester resinsMaterials Chemistry and Physics, 2023
- Synthesis of a novel environmentally friendly hybrid pigment for effective corrosion control of mild steelJournal of Environmental Chemical Engineering, 2023
- Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solutionCorrosion Science, 2022
- Surface treatment to improve water repellence and compatibility of natural fiber with polymer matrix: Recent advancementPolymer Testing, 2022
- Improved adhesion of polyurethane-based nanocomposite coatings to tin surface through silane coupling agentsInternational Journal of Adhesion and Adhesives, 2021
- Micro and nanocrystalline cellulose derivatives of lignocellulosic biomass: A review on synthesis, applications and advancementsCarbohydrate Polymers, 2020
- Unsaturated polyester resin concrete: A reviewConstruction and Building Materials, 2019
- Corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by a sol-gel based silane coating filled with amino and isocyanate silane functionalized graphene oxide nanosheetsApplied Surface Science, 2018
- Distinctive roles of silane coupling agents on the corrosion inhibition performance of graphene oxide in epoxy coatingsProgress in Organic Coatings, 2017
- Effects of multi-walled carbon nano tubes on corrosion protection of zinc rich epoxy resin coatingJournal of Industrial and Engineering Chemistry, 2015