Review of Imprinted Polymer Microrings as Ultrasound Detectors: Design, Fabrication, and Characterization
- 10 April 2015
- journal article
- review article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 15 (6) , 3241-3248
Abstract
Detectors play a vital role in ultrasound sensing and imaging applications. With the rapid development of photoacoustic imaging technology in recent years, novel ultrasound detectors based on optical methods have gained increased attention, among which the imprinted polymer microring is a representative one. This review covers the device design, fabrication, and characterization, with an emphasis on how the imprinting-based fabrication methodology benefits the device performance, which further facilitates photoacoustic imaging and sensing applications. By carefully designing and fabricating the imprint mold, the imprinted polymer microring has a quality factor on the order of $10^{5}$ at 780 nm. The device has advantages such as wide acoustic bandwidth response from dc to 350 MHz at −3 dB, low noise equivalent detectable pressure, wide acceptance angle, and so on. The polymer microring has been successfully employed in applications such as photoacoustic imaging and real-time terahertz pulse detection.Keywords
Funding Information
- National Institutes of Health
- National Science Foundation (DBI-1256001)
This publication has 50 references indexed in Scilit:
- High-sensitivity and wide-directivity ultrasound detection using high Q polymer microring resonatorsApplied Physics Letters, 2011
- Low-noise small-size microring ultrasonic detectors for high-resolution photoacoustic imagingJournal of Biomedical Optics, 2011
- On-chip switching of a silicon nitride micro-ring resonator based on digital microfluidics platformOptics Express, 2010
- Low loss etchless silicon photonic waveguidesOptics Express, 2009
- High-resolution ultrasonic imaging using an etalon detector arrayApplied Physics Letters, 2008
- Nanoimprint Lithography: Methods and Material RequirementsAdvanced Materials, 2007
- Sidewall roughness control in advanced silicon etch processMicrosystem Technologies, 2003
- Polymer microring resonators fabricated by nanoimprint techniqueJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Microring resonator channel dropping filtersJournal of Lightwave Technology, 1997
- Observation of Structure Resonances in the Fluorescence Spectra from MicrospheresPhysical Review Letters, 1980