Interlayer bond strength models for three dimensional-printed mortar
- 29 June 2026
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 179 (8) , 836-846
Abstract
Three-dimensional (3D) printing enables free-form construction without formwork; however, interlayer interfaces formed during layer-by-layer deposition act as weak planes that govern structural performance. This study presents a combined experimental and predictive investigation of interface normal and shear strengths of 3D-printed mortar under varying printing interval times and temperatures, considering compressive strength, age and initial setting time. Mortars with two strength classes were tested under normal and elevated temperature conditions. Results show that elevated temperature enhances early-age hydration and interface strength at short intervals but accelerates surface moisture loss and bond degradation at longer intervals. A key finding is that interlayer bond performance is governed by the printing interval relative to the initial setting time, providing a unified parameter for assessing interface quality. Based on regression analysis, empirical models are proposed to predict interface normal and shear strengths as functions of printing interval time, temperature, compressive strength, mortar age and initial setting time. The proposed models show good agreement with experimental results and provide a practical design-oriented framework for evaluating interlayer bond performance of 3D-printed mortar structures.Keywords
This publication has 35 references indexed in Scilit:
- Determining the strength of 3D printed concrete with the modified slant shear testStructural Concrete, 2025
- 3D Printed Concrete for Sustainable Construction: A Review of Mechanical Properties and Environmental ImpactArchives of Computational Methods in Engineering, 2025
- Mechanical anisotropy evaluation and bonding properties of 3D-printable construction and demolition waste-based geopolymer mortarsCement and Concrete Composites, 2022
- Mechanical anisotropy of ultra-high performance fibre-reinforced concrete for 3D printingCement and Concrete Composites, 2022
- Mix design concepts for 3D printable concrete: A reviewCement and Concrete Composites, 2021
- 3D concrete printing of permanent formwork for concrete column constructionCement and Concrete Composites, 2021
- Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: Experiments and molecular dynamics studiesCement and Concrete Composites, 2020
- Fresh and hardened properties of 3D printable cementitious materials for building and constructionArchives of Civil and Mechanical Engineering, 2018
- Complex concrete structuresComputer-Aided Design, 2015
- Developments in construction-scale additive manufacturing processesAutomation in Construction, 2012