Modeling and Experimental Analysis of Low-Viscosity/High-Permeability Sealant Penetration Dynamics in Oil-Filled Submarine Cables
Open Access
Abstract
Insulating oil leakage from oil-filled submarine cables compromised operational integrity and posed environmental risks. This study proposed a novel sealant-plugging repair technique that combines low-viscosity/high-permeability sealant permeation and high-viscosity/low-permeability sealant replacement and pressurization. The permeation process of the low-viscosity sealant, from the injection port to the outlet, was visualized using the Volume of Fluid (VOF) method. Analysis focused on: (1) sealant volume fraction in the sealing cavity; (2) sealant leakage volume fraction along the radial gaps at outlet 2; and (3) relative velocity of the permeating sealant along the radial gaps at outlet 2. Application of 0.4 MPa of sealant pressure achieved the key balance, characterized by: (i) Completed displacement of air from the sealing cavity; (ii) Full permeation of sealant into the gaps between the armored copper strip gaps and the radial gaps; (iii) Avoidance of the excessive sealant leakage flow observed at 0.5 MPa, promoting efficient sealant usage; (iv) A short time to reach permeation and leakage steady state. This study demonstrated the feasibility of the low-viscosity sealant penetration into both the gaps between the armored copper strips and the radial gaps under 0.4 MPa injection pressure. It provided theoretical and experimental guidance for this process within the sealant plugging repair technique.Keywords
Funding Information
- China Southern Power Grid Co, Ltd. Technology Project (No.07000KC24010005 (SEPRI-K24B024))
This publication has 14 references indexed in Scilit:
- Computational Fluid Dynamics for Modeling of Hydrotreating Fixed-Bed Reactors: A ReviewProcesses, 2025
- Numerical analysis of dispersion characteristics of underwater gas-oil two-phase leakage processMarine Pollution Bulletin, 2023
- Surface tension of bulky colloids, capillarity under gravity, and the microscopic origin of the Kardar-Parisi-Zhang equationPhysical Review E, 2023
- Numerical Study on the Migration of Leaked Oil in Submarine Sediment Caused by Pipeline Leakage Using Two-phase Flow ModelJournal of Marine Environmental Engineering, 2023
- Modelling of rheological and thermal properties for thermoset injection molding simulation processAIP Conference Proceedings, 2023
- Design and Testing of Real-Time Sensing System Used in Predicting the Leakage of Subsea PipelineSensors, 2022
- CFD modeling of stagnation reduction in drinking water storage tanks through internal pipingUrban Water Journal, 2021
- Oil Spill Modeling: A Critical Review on Current Trends, Perspectives, and ChallengesJournal of Marine Science and Engineering, 2021
- Improving Emergency Response Systems in the Oil and Gas Industry To Reduce Environmental Damage2020
- Sensors, Features, and Machine Learning for Oil Spill Detection and Monitoring: A ReviewRemote Sensing, 2020