Development of a fiber-optic temperature sensor based on chirped Bragg gratings and modulation of optical radiation intensity
- 1 December 2024
- journal article
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (12) , 827-830
Abstract
Subject of study. A fiber-optic temperature sensor based on measurement of the reflected optical power is studied. Aim of study. A fabrication technique for fiber-optic temperature sensors based on chirped fiber Bragg gratings and measuring the reflected optical power is developed. Method. The fiber-optic temperature sensor consists of a brass probe with two chirped Bragg gratings, one of which is also enclosed in a steel capillary tube and has higher temperature sensitivity than the other grating. Changes in temperature modulate the overlap between the spectra from the first and second Bragg gratings, enabling detection of changes in the optical power reflected by the structures. Main results. An approach is being developed for creating a fiber-optic temperature sensor based on measurement of optical radiation intensity. The sensor has a design operating range of −20∘C to +80∘C. The sensor was tested by varying the temperature from −20∘C to +80∘C in 10°C intervals, revealing a sensor sensitivity of −0.015dB/∘C. The sensor was also found to have a temperature measurement error of 1.0% (relative to a thermocouple). The deviation in the sensor readings at a steady temperature value is estimated to be 0.06°C. Practical significance. The temperature sensor developed herein is part of the worldwide trend towards cost-effective design solutions. This measurement technique based on modulation of the optical intensity enables the use of a readily available interrogation scheme that does not require expensive equipment such as an optical spectrum analyzer or interrogator. This interrogation scheme also has the advantages of high data recording speed, relatively simple design, and the absence of strict requirements with respect to operating conditions.Keywords
Funding Information
- Ministry of Science and Higher Education of the Russian Federation (FSER-2024-0006)
This publication has 11 references indexed in Scilit:
- Method of packaging a fiber Bragg grating for passive temperature compensationJournal of Optical Technology, 2023
- Development and investigation of the sensitive element of the amplitude fiber-optic temperature sensor based on superimposed chirped Bragg gratingsOptical Fiber Technology, 2022
- Optical Fiber Sensors: Working Principle, Applications, and LimitationsAdvanced Photonics Research, 2022
- High-performance fiber Bragg gratings arrays inscription methodOptical Fiber Technology, 2021
- Fiber Optic Shape Sensors: A comprehensive reviewOptics and Lasers in Engineering, 2021
- Inscription and investigation of the spectral characteristics of chirped fiber Bragg gratingsJournal of Optical Technology, 2018
- Overlap Spectrum Fiber Bragg Grating Sensor Based on Light Power DemodulationSensors, 2018
- Inscription of superimposed fiber Bragg gratings using a Talbot interferometerJournal of Optical Technology, 2017
- Laboratory setup for fiber Bragg gratings inscription based on Talbot interferometerOptical and Quantum Electronics, 2016
- Fiber Optic Sensors: Short Review and Applications2014