Development of a trace-based approach for elastic characterization of multi-material composite pipes: Theory and testing
Preprint
- 28 November 2025
- preprint
- Published by Springer Nature in Research Square
Abstract
Design of composite wrap pipes demands accurate experimental determination of the mechanical properties of the materials considered. The emphasis of this article is on the experimental characterization of the overall mechanical properties of the composite pipe through axial tension and internal pressure non-destructive tests. A stiffness matrix trace-based methodology is developed to determine the elastic properties of multi-material composite pipes (PVC liner + GFRP wrap) using only axial loading and internal-pressure tests. The approach identifies axial and hoop Young’s moduli and the axial/hoop Poisson’s ratios at the pipe level, and then infers the in-plane shear modulus from the invariant trace of the reduced stiffness matrix (Tsai modulus), as an alternative way to torsion test. Four nominally identical pipes were manufactured and tested in triplicate under axial tension, axial compression, and internal pressure. Despite identical constituents and processing, measurable variability was observed across pipes, underscoring the need for bulk, pipe-level characterization rather than extrapolation from coupon-level plies. Finite-element simulations using the identified properties reproduced the measured axial and hoop surface strains within the experimental 95% confidence bands for all load cases. The results demonstrate that the proposed, non-destructive, trace-based workflow provides accurate elastic properties for composite pipes while avoiding specialized torsion fixtures and specimen extraction.Keywords
All Related Versions
- Version 1, 2025-11-28, Research Square
- Published version: Applied Composite Materials, 33 (2), 76.
This publication has 47 references indexed in Scilit:
- Mechanical Integrity and Risk-Based Inspection of Process Equipment, Piping and Pipelines2024
- Axisymmetric Stress State of an Adhesive Joint of Two Coaxial Pipes. An Improved TheoryMechanics of Composite Materials, 2023
- Method for Determining the Shear Moduli of Composite Materials from Experiments in the Three-Point Transverse BendingMechanics of Composite Materials, 2023
- Experimental and Finite-Element Analysis of Metal-Inserted Filament-Wound Composite TubesMechanics of Composite Materials, 2021
- Numerical and Experimental Investigation of the Burst Resistance of Glass-Fiber Thermoplastic Composite Pipes under Internal PressureMechanics of Composite Materials, 2021
- An analytical model for the progressive failure prediction of reinforced thermoplastic pipes under axial compressionPolymer Composites, 2021
- Numerical‐experimental structural instability analysis of composite tubes considering manufacturing parameters and imperfectionsPolymer Composites, 2020
- Experimental and numerical investigation of the strain response of the filament wound pressure vessels subjected to pressurization testPolymer Composites, 2019
- Influence of the Structure and Number of Reinforcement Layers on the Stress State in the Shells of Tanks and Pressure PipesMechanics of Composite Materials, 2017
- Biaxial testing of composite tubesExperimental Mechanics, 1985